安裝 Steam
登入
|
語言
簡體中文
日本語(日文)
한국어(韓文)
ไทย(泰文)
Български(保加利亞文)
Čeština(捷克文)
Dansk(丹麥文)
Deutsch(德文)
English(英文)
Español - España(西班牙文 - 西班牙)
Español - Latinoamérica(西班牙文 - 拉丁美洲)
Ελληνικά(希臘文)
Français(法文)
Italiano(義大利文)
Bahasa Indonesia(印尼語)
Magyar(匈牙利文)
Nederlands(荷蘭文)
Norsk(挪威文)
Polski(波蘭文)
Português(葡萄牙文 - 葡萄牙)
Português - Brasil(葡萄牙文 - 巴西)
Română(羅馬尼亞文)
Русский(俄文)
Suomi(芬蘭文)
Svenska(瑞典文)
Türkçe(土耳其文)
tiếng Việt(越南文)
Українська(烏克蘭文)
回報翻譯問題
1. Lower Recording Quality Settings
Open Steam Overlay > Settings > Recording tab.
Set Video Quality to Medium or Low.
Disable Record Microphone temporarily to isolate the issue.
Turn off recording the desktop audio if not needed.
Sometimes Steam struggles at high quality if your CPU or disk is under load.
2. Check Disk and CPU Usage
While recording, open Task Manager (Ctrl+Shift+Esc).
Look for CPU or Disk usage spikes. If your CPU or disk hits 100%, that can cause audio stuttering.
If disk usage is high, try saving recordings to a faster drive (preferably SSD).
🔈 3. Change Audio Settings
Right-click the sound icon in Windows > Sounds > Playback tab.
Select your main audio device > Properties > Advanced tab.
Set sample rate to 48000 Hz and 16-bit (this is often more stable).
Do the same for Recording devices (microphone).
. Disable Audio Enhancements
Go to the same audio device settings as above.
In the Enhancements tab, check “Disable all enhancements”.
Some enhancements cause audio lag or desync.
5. Update Drivers and Windows
Update:
GPU drivers (NVIDIA/AMD/Intel)
Audio drivers (Realtek or whatever your system uses)
Steam client
Windows OS
6. Try an Alternate Recorder
If Steam’s recorder continues to give issues, try:
OBS Studio (Free, highly customizable)
NVIDIA ShadowPlay (If you have an NVIDIA GPU)
AMD ReLive (For AMD cards)
OBS gives you fine-grained control over bitrate, audio sync, and CPU/GPU usage.
Very useful info! I have been having similar issues in OBS, not the steam recording as I tried it once and wasn't familiar with fine tuning it
But thank you muchly!
will try some of these instructions