Kauppasivu
Space Engineers
Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Space Engineers

Kauppasivu
Space Engineers >  Workshop > Käyttäjän Vicizlat Workshop
31 arvostelua
VCZ Multifloor Cargo Elevator Remote Control
Kuvaus Keskustelut0 Kommentit10 Muutokset
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Type: IngameScript
Tiedostokoko
Julkaistu
Päivitetty
4.641 KB
13.4.2019 klo 9.51
23.2.2020 klo 12.53
2 muutosilmoitusta ( näytä )
Tekijä
Vicizlat
Kirjautunut ulos
Näytä kaikki 124 kokoelmaa
2,222 Uniikkeja kävijöitä
784 Nykyiset tilaajat
58 Nykyiset suosikit

Tilaa ladataksesi
VCZ Multifloor Cargo Elevator Remote Control

Kuvaus
This script is a Remote Control via Antenna for my Multifloor Cargo Elevator.
It will not work for anything else.

INSTRUCTIONS:

Receiving signal:
To receive signal, have an antenna on the same grid as this PB. No other setup is needed.

Sending signal:
Have an antenna on the grid from which you want to send messages.
Attach PB to Toolbar with argument in the following format:
{ElevatorID}Floor OR {ElevatorID}Stop
"ElevatorID" is the block number of the elevator you want to control. You will find that in Custom Data in Control Panel,
"Floor" is the number of the floor where you want to send the elevator (if 0 it will send a STOP signal),
"Stop" sends a signal to STOP the elevator regardless if it has reached a floor or not.
(This is NOT case sensitive and you can also use 0)
10 kommenttia
< >
Vicizlat  [tekijä] 23.2.2020 klo 12.58 
Update:
- Made to work with the Intergrid Communication System, thanks to EagleEyes.
EagleEyes 23.2.2020 klo 10.35 
Your welcome ...and thank you for this awesome mod ! We are gladly using it on our server !
Vicizlat  [tekijä] 23.2.2020 klo 10.25 
Oh, that's very nice of you. Thank you! I will check it out and upload as soon as I can.
EagleEyes 23.2.2020 klo 8.37 
Hello, I experimented with your script and got a working version now. I used this as inspiration:
https://github.com/malware-dev/MDK-SE/wiki/IGC-Example-2-Toggle-Lights

Here you can find the code for the modified script. Hope its useful to you
https://pastebin.pl/view/ebb1b2f2
EagleEyes 23.2.2020 klo 7.17 
I had the same issue with not being able to control it from the inside. The solution for me was to weld up the moving platform. Appearantly it was not completed yet.
Kiro 23.1.2020 klo 12.14 
It's fine. I was just using it as an attempt at actually controlling the elevator. It would have been nice, but if I can get the manual mode to work...
Vicizlat  [tekijä] 23.1.2020 klo 5.34 
It looks like they finally removed the old way of receiving and transmitting messages. :(
I am sorry but this will not be fixed soon.
Kiro 23.1.2020 klo 4.22 
Ah, sorry. I thought the bug report for this not working at all was more pressing. I'll also leave a report more in-depth on the main mod. Here's the message that pops up when I hit 'check code' on the programmable block that has this script. I then link to the block using the G menu with the argument for the floor that I want and nothing seems to happen. I tried both with the full elevator address, and by filling in the single elevator option in the script itself, but neither did anything.

https://imgur.com/a/msceIPx
Vicizlat  [tekijä] 21.1.2020 klo 15.41 
That's an odd issue to have. I'll take a look at this and if it's working correctly.
But I am more interested in why you can't control it from the inside. Can you tell me more about that? And also why didn't you post a bug report there if you were having such an issue?
Kiro 21.1.2020 klo 15.38 
Doesn't seem to function at all anymore, sadly. I was trying to use this as a workaround for the cargo elevator, as I can't seem to manually change floors from inside it either. The only way to get it to move is to travel to the outside of the elevator on a different floor and call it there. Kinda frustrating.