Stormworks: Build and Rescue

Stormworks: Build and Rescue

62 평점
TX3 Small Light Truck
3
2
   
어워드
즐겨찾기
즐겨찾기됨
즐겨찾기 해제
파일 크기
게시일
업데이트일
161.901 KB
2020년 6월 27일 오전 6시 41분
2020년 7월 4일 오전 7시 34분
업데이트 노트 2개 (보기)

다운로드 위해 구독하기
TX3 Small Light Truck

Aome님의 1 모음집
- Aome's workshop -
아이템 31개
설명
===Introduction===
TX3 Series small truck.
The maximum speed is 132km / h.
It is a light truck with a simple, small 5-speed gear .
There are seats for two people, an auto-heater, and a truck bed suitable for transporting small loads.
The so-called “KeiTora” standard in Japan.

When making a small car, it's fun to design the engine position so that it fits into a small car body...

===Startup procedure===

1 Turn the Start key.

2 Put the gear in first gear by holding down the left key and pressing up. After accelerating sufficiently, release the left key and engage the clutch.

3 Change gears to suit your speed needs.


I am a Japanese just starting to study English. Sorry for the hard-to-read sentences. Please let me know if you find any typos or wrong words.

Please let me know if you have any design mistakes. We will fix it immediately.
댓글 28
Ewan 2020년 12월 20일 오전 7시 42분 
Could you add a small crane?
sirkaldar 2020년 8월 30일 오전 12시 54분 
I've been thinking about getting a Kei Truck irl but the nearest importer is about 6 hours drive away, now I can test drive one :P
Suyanto 2020년 8월 29일 오전 5시 42분 
なんらかの理由で動きが止まらない >_>
Suyanto 2020년 8월 29일 오전 5시 09분 
how do i open the door from outside ? :/
kriffe2004 2020년 8월 12일 오후 12시 00분 
Can you make an electric version?
StormTrail 2020년 7월 29일 오전 11시 24분 
I used your vehicle in a video! https://youtu.be/KotbhAlvcog
JarnSorm 2020년 7월 21일 오후 1시 39분 
:cozyspaceengineersc:
Aome  [작성자] 2020년 7월 12일 오후 6시 25분 
Mr.notjordansime,Refuel from the fluid connector on the left side. By default the refueling tank is located near the workbench!
notjordansime 2020년 7월 12일 오후 1시 22분 
Sorry if this is a noobie question, but how do I add fuel to the truck?
Aome  [작성자] 2020년 7월 5일 오전 12시 45분 
Sorry, the electrical connection seems to be broken due to the electrical node being removed from the fluid connector in yesterday's update. Fixed.