2nd tap function: Enable Waypoint heading & distance readouts
- Hover mode & Horizontal velocity indicator engage when below 20kts

---

Seat Hotkeys
1. P: cntrl / H: AP
2. P: spdH / H:altH
3. Radio PTT
4. Take/Release SARcam Cntrl
5. Winch Up
6. Winch down

P: Press/tap. Press the key briefly for this function
H: Hold Press and hold until the function occurs

The cntrl swap system works as a 'snatch' rather than a swap. e.g If AP is enabled, just need to tap 1 to take cntrl back, rather than hold 1 to release AP (tapping 1 when in cntrl or releasing AP by holding 1 will return the heli to NCI (no control input). This also means that to swap control the new pilot taps 1 and the current pilot doesn't do anything (also means current pilot can't forcefully pass control to the new pilot, current pilot can only release their own control to NCI)

2nd tap function: Swap fuel % reads to time

NG, IT & TH metres: Metres bars will rise up each side of the scale in them middle
NR metre: Metre bar will rise up right side

GREEN: Powered on
dark GREEN: Has power but disconnected (batteries only)
WHITE: Powered off.

2nd tap function: Cycle cameras

1. Tail camer
2. Belly Camera
3. FLIR

An empty module for the installation of additional systems.

The central 1x1 display above the osprey locator takes video input straight from the electrical connector on the belly and returns it's composite output.

Allows for use with plug-and-play attachments (simply include a lua-control MC in your attachment and have the video and composite nodes wired through the connector)