Stormworks: Build and Rescue

Stormworks: Build and Rescue

104 valoraciones
Voith Gravita - [BR261] - Diesel Electric Locomotive
2
   
Premiar
Favoritos
Favorito
Quitar
Tamaño
Publicado el
Actualizado el
1.158 MB
1 ABR 2023 a las 2:54
1 ABR 2023 a las 2:56
2 notas sobre cambios ( ver )

Suscríbete para descargar
Voith Gravita - [BR261] - Diesel Electric Locomotive

En 1 colección creada por Sir Murtak [108th]
Sir Murtaks Vehicle Compendium
111 artículos
Descripción
Publicado originalmente por Background Info:
A modern Diesel Electric Locomotive mainly designed for pulling smaller consists or doing work on industrial branch lines. - Perfect for the world of Stormworks! It's a bit of a blend between the two existing Versions and isn't meant to replicate it down to the last bolt but rather to capture the essential style.

⠀⠀⠀⠀⠀⠀⠀⠀⠀ ⠀⠀ 𝙋𝙡𝙚𝙖𝙨𝙚 𝙙𝙤 𝙣𝙤𝙩 𝙧𝙚𝙪𝙥𝙡𝙤𝙖𝙙 𝙩𝙝𝙞𝙨 𝙬𝙞𝙩𝙝𝙤𝙪𝙩 𝙢𝙮 𝙋𝙚𝙧𝙢𝙞𝙨𝙨𝙞𝙤𝙣.





Specifications / Equipment:
  • Vmax: 100 km/h
  • Capable of Multiunit operation in all orientations (thanks to WhiteNoise)
  • RC Reciever for shunting with remote controller
  • Safety Equipment: SIFA, Traction Control
  • Airbrake Simulation (many thanks to XCinos)

Startup:
  1. Battery Isolation: ON
  2. Master Key : ON
  3. SIFA System: OPTIONAL (Please read down below what this actually is before using it)
  4. SIFA Acknowledge
  5. ENGINE START: HOLD
  6. Lights : OPTIONAL
  7. Brake : CHECK RELEASED

SIFA System:
The SIFA System (Sicherheitsfahrschaltung) is a simple Dead Men's Vigilance Device. It requires a frequent Button input (labeled SIFA) or else the Loco will initiate emergency braking. The System works in three Stages:
  1. - First Stage - No Warning Light / No Braking - pressing SIFA Button will reset Timer
  2. - Second Stage - Blinking Warning Light / No Braking - pressing SIFA Button will reset Timer
  3. - Third Stage - Steady Warning Light + Warning Tone / Emergency Braking - reset Loco (reverser neutral, throttle zero, no brakes )
You don't need to use this System if you don't want to. Just leave the SIFA Switch in the OFF Position. If the Loco is stationary it will not require an Input.

Credits:
  • Sky/Jan -Radio
  • Xcinos - airbrakes
  • WhiteNoise - Multiunit Controller
  • Thanks to GERUNIMO as usual for doing Q/A and helping me out

FAQ:
I can't change the Reverser Position or the Shunting Mode?
>Stop the Locomotive and make sure the throttle lever is 0

How can I unfold the Seat?
>Look below the console, there's a "Stow Seat" button.

Are you gonna upload those coal wagons?
>Yes, I just didn't have time to properly polish them yet. I wanted to release this anyways since I was working on it for a few months by now.

Do you like trains?
>Yes, sometimes.


approved by a real railroader




Enjoy! Consider leaving a Rating and a Comment. If you find any Bugs please report them down below. If you feel extra jazzy and have some spare change to throw at me feel free to click this link :)
https://www.buymeacoffee.com/sirmurtak
29 comentarios
Sir Murtak [108th]  [autor] 24 JUL 2023 a las 11:47 
considered going faster? :)
(all jokes aside if you can't you gotta disable the shunting mode by coming to a complete stop first)
lil_DogGamer 24 JUL 2023 a las 11:44 
im really going slow
Sir Murtak [108th]  [autor] 1 JUL 2023 a las 13:32 
start both engines individually and turn on the master key on ONE engine
that should do it
TheJAWsome1 1 JUL 2023 a las 10:30 
how do i ues Multiunit
lena8298 15 MAY 2023 a las 10:51 
just trying it
dogtherevenger 28 ABR 2023 a las 19:45 
is there any cargo or hopper cars that come with this fine train?
Sir Murtak [108th]  [autor] 26 ABR 2023 a las 10:33 
bring the loco to a full stop to switch modes
Avis 26 ABR 2023 a las 9:47 
how do i turn off shutning mode im clicking the button but it stays on
Hamster Master 18 ABR 2023 a las 10:42 
Got it, thank yout
Sir Murtak [108th]  [autor] 18 ABR 2023 a las 10:26 
you need to enter a frequency in to the keypad first(default signals use 440), the button to switch is next to the radio screen