Abonează-te pentru a descărca
Battletech Paperdoll

READ THE DISCRIPTION!!!!!

The microcontroller is for 1x1 displays, showing the current mech status.

On-screen, the 'External Damage' destruction will light up as a contour, and Internal Damage as the interior


In stormworks, the "constant on signal" blocks send, as the name suggests, a constant on signal. However, its output is based on three different damage states:

1. Undamaged - the block outputs a constant "ON" signal.
   
2. Slight / Light damage - the block outputs a pulsating "ON" signal, switching to "OFF" here and there.
   
3. Heavy damage / Destroyed - the block doesn't output any signal whatsoever (aka. transmits OFF)

My MC takes these outputs from around your build and monitors either they work or not.
If it receives ON signals from all constant on blocks in a limb, it will render it green on the display.
If one of the blocks gets damaged, (2nd state) the limb will turn into a pulsating red box on the display.
If a few blocks get damaged in a limb (2nd state) that limb will pulsate red more frequently on the display.
If one of the blocks gets destroyed (3rd state) that limb will be displayed as a static red box.


Every limb/section has at least two inputs to fill.
1 - ED (short for 'External Damage')
2 - ID (short for 'Internal Damage')

ED input is responsible for rendering the outlines on the display, the ID is responsible for rendering the insides of on-screen boxes.

Connect to the microcontroller various constant on blocks placed around your build.

The constant on blocks designated to detect internal damage HAVE to be placed near important modules if you won't place them there, your leg might not get flagged on screen when in reality it will be broken and unusable. To avoid this, place the constant on blocks right next to pivots, other microcontrollers, or any important parts you care about

The constant on blocks designated to detect external damage don't have any strict placement. However, I'd recommend placing some blocks in front of the ID detecting blocks, so that the ED blocks get hit first instead of the ID blocks. For example: The ED blocks placed directly onto the leg will inform you of ANY damage, while the ID near pivots will inform you of actually vital hits or vital components damaged.

Additionally my MC allows for more than 1 ID and 1 ED block for more important body parts. For legs, there are 2 ED and 2 ID slots available. I'd recommend placing one ID on the hip pivot, one ID on the knee pivot and the ED's somewhere on the legs. That way you will get informed of any kind of damage.



The LUA code is very simple to modify, so please do so if you wish.

Feel free to ask questions, I usually answer.

Clan command out :P