First we need to start setting all out in Moza Pit House before we can go to the game settings. The most important is to get as much as we can get from 5Nm base without loosing any details. This is going to be universal settings for your Supercar / Hypercar and also GT2 / GT3.

Tutorial is valid for:

AC EVO 0.2.2
Moza R5 Firmware 1.2.5.5
Moza Pit House 1.3.2.12



*Hands-off protection must be switched off for better performance and road details.









10Hz - 90%
15Hz - 80%
25Hz - 140%
40Hz - 160%
60Hz - 60%
100Hz - 0%

*If you have Haptic Pedals Reactor system installed on your SRP-Lite pedals than use this EQ. ABS vibrations are no longer needed to be reproduced by R5 Base.


10Hz - 150%
15Hz - 200%
25Hz - 0%
40Hz - 150%
60Hz - 100%
100Hz - 0%







BT mode you can have On / Off . It's up to you.




Clutch - 90% / 100%
Brake - 5% / 100% ( if you have brake mod first calibrate to your preference )
Throttle - 95% / 100%


In the game select your R5 and adjust all as shown on screen and you are ready to go. Remember to set your stering angle correctly, must be the same in Moza Pit House and in AC EVO for good experience. FFB Gain set to 65% if you planing to play sesions longer than 10 laps. For short races you can use 70% FFB Gain. Main reason to set 65% FFB is to keep R5 from overheating. I have noticed if sesions are long with 70% FFB R5 base is getting too hot and it rediuces performance. At the moment I recomend to stay around 65% FFB in game. Hope this helps feel the game as best as it can. Also I did some lap times as reference with Maserati GT2 but it will work for any car. Just test yourself to see how fast you are.

---