Engine swap SR20DE
Block 3 upgrades
pistons 4 upgrade
Head 3 upgrades
Intake 4 upgrades
Exhaust 4 upgrades
Turbo 2 upgrades
Ecu 3 upgrades
Nitrous 0 upgrades

402HP

Wheels.!.?.!.?.

Wheel Size R15

Front camber -6,2*
Rear camber -10.7*

Front offset -32mm
Rear offset -50mm

Steerlock 51*

Drivetrain F/R 0/100* or 40/60 personal prefferense

Ride height -30mm

Great car for track and okay for akina.
If you have too much turbo your car will almost always spinout

Engine 4a-GE
Block 5 upgrades
Pistons 3 upgrades
Head 3 upgrades
Intake 5 upgrades
Exhaust 5 upgrades
Turbo 3 upgrades
Ecu 5 upgrades

505hp
606Nm

Car Setup
Front camber -6.1*
Rear camber -7.4*

Front offset -18mm
Rear offset -25mm

Steerlock 51*

Drivetrain 10%/90%

Wheelsize R17

Rideheight -10mm

This build i found was very good on Tounge Drift 1. It was good at holding lines.

Keep the engine stock
Turbo 4 upgrades
Ecu 3 upgrades
Piston 2 upgrades
It's Amazing on the track.

On AKINA i would recomend going for:
3 upgrades Turbo
2 upgrades Piston
3 upgrades Ecu

Engine B16B
Block 4 Upgrades
Pistons 4 Upgrades
Head 3 Upgrades
Intake 5 Upgrades
Exhaust 5 Upgrades
Turbo 3 Upgrades
Ecu 5 Upgrades
Nitrous 3 Upgrades

HP 479

Wheels
Front camber -8.4*
Rear camber -9.8*

Front offset -20mm
Rear offset -27mm

Wheelsize R15

Ride Height -13mm

Steerlock 51*

Drivetrain 1%/99%

Good on track 1, Works on akina, Lovley on drift track 1

Engine 4A-GE
Block 5 Upgrades
Pistons 4 Upgrades
Head 5 Upgrades
Intake 3 Upgrades
Exhaust 2 Upgrades
Turbo 3 Upgrades
ECU 5 Upgrades
Nitrous 1 Upgrade

HP 503
Nm 604

Wheels

Front camber -10.8*
Rear camber -7.8*

Front offset -29mm
Rear offset -19mm

Love this build. It can hold angles and just dominate ;D Akina, Drift track 1, Track 1.

Engine KA24DE
Block 1 upgrade
Pistons 2 upgrades
Head 1 upgrade
Intake 4 upgrades
Exhaust 3 upgrades
Turbo 3 upgrades
Ecu 3 upgrades
Nitrous 2 upgrade

HP 479

Wheels

Front camber -11.7*
Rear camber -13.3*

Front offset -23mm
Rear offset -26mm

This build is my favorite build of them all. It is great for AKINA, Drift track 1 and Track 1.

1. Build
Swap 1JZ-GE
Block 2 upgrades
Pistons 4 upgrades
Head 3 upgrades
Intake 2 upgrades
Exhaust 2 upgrades
Turbo 2 upgrades
Ecu 2 upgrades
Nitrous 1 upgrade

500HP

Wheels.!.?.!.
Front camber -7.4*
Rear camber -7.5*

Front offset 6mm
Rear offset 2mm

Great on AKINA and on the Track!

Swap to 2JZ-GE
No upgrades

226HP

Wheels normal

Got this build from my friend :)
Ps; the picture below is an example for the tires :)

Engine: LS1
Block 1 upgrade
Pistons 3 upgrades
Head 3 upgrades
Intake 2 upgrades
Exhaust 1 upgrade
Turbo 2 upgrades
Ecu 4 upgrades
Nitrous 1 upgrade

Wheels
Fron camber -8.8*
Rear camber -10.2*

Front offset -25mm
Rear offset -37mm

This build is focused on Drift track 1 for people who want to play with there friends.
But it should work great for track 1 too.

Engine KA24DE
Block 4 Upgrades
Pistons 5 Upgrades
Head 3 Upgrades
Intake 4 Upgrades
Exhaust 4 Upgrades
Turbo 3 Upgrades
Ecu 5 Upgrades
Nitrous 5 Upgrades

HP 512
Nm 614

Wheels
Front camber -9.9*
Rear camber -10.5*

Front offset -17mm
Rear offset -22mm

Great to just stay in 2 gear and hold a angle. Track 1, Drift track 1, Akina.

Engine 4G63
Block 5 upgrades
Pistons 5 upgrades
Head 0 upgrades
Intake 4 upgrades
Exhaust 4 upgrades
Turbo 0 upgrades
Ecu 5 upgrades
Nitrous 2 upgrades

302HP

Wheels
Front camber -3.1*
Rear camber -9.7*

Front offset -11mm
Rear offset -22mm

With this build Is good to switch coners. The spped you should hold is 40-50kmh (like every other build). The max speed you should have is 70kmh. This build would not be possible if i didnt get help from my friend.

Engine VQ35DE
Block 4 Upgrades
Pistons 5 Upgrades
Head 4 Upgrades
Intake 3 Upgrades
Exhaust 3 Upgrades
Turbo 2 upgrades
Ecu 5 upgrades

781HP

Wheels
Wheel size R18
Front camber -10.9*
Rear camber -10.9*

Front offset -19mm
Rear offset -19mm

Ride Height -16mm

Drivetrain 10/90%

Steerlock 51*

This build you need to use handbrake alot for it to stay sideways. if you have a wheel setup you need Drivetrain too be at 40/60% for it to stay where you want it to stay

Engine FA20
Block 1 upgrade
Pistons 1 upgrade
Head 1 upgrade
Intake 1 upgrade
Exhaust 1 upgrade
Turbo 3 upgrades
Ecu 1 upgrade
Nitrous 1 upgrade

534HP

Wheels
Front camber -9.1*
Rear camber -9.1*

Front offset -20mm
Rear offset -30mm

I like this build, it works great for AKINA and its okay on track. All thanks to Spammie. Be sure to check him out and his youtube channel https://www.youtube.com/user/SuperGameplayTime :D He made this build come true!

Engine 4G63
Block 3 upgrades
Pistons 5 upgrades
Head 3 upgrades
Intake 5 upgrades
Exhaust 5 upgrades
Turbo 3 upgrades
Ecu 3 upgrades
Nos 2 upgrades

596HP

Wheels.!.?.!.
Front camber -14.9*
Rear camber -14.4*

Front offset -24mm
Rear offset -27mm

It's good on the track and on akina.