It can be one you made, or one from the workshop. For this tutorial, I will use my Civetta Bolide, which you can find here.


...and move them as far upwards as you can without making the body scrape the ground, as shown:


You also need to max out the suspension stiffness.


Set the steering lock to 60 degrees and disable the brakes and drive, if applicable.


If you would like, I have also made this finished product available on the workshop here.

Approach a turn in a road. It is safe to execute a drift in a tight corner if you are going slower and vice versa for wide corners like the one shown.

This is why we disabled the front brakes earlier. Since only the back wheels brake, it swings the back out and causes a drift to occur.

If you accelerate too late, you will spin out. Same for accelerating too fast. Find a good inbetween for your car. The large steering lock we applied helps keep us from spinning out but must be managed to keep your car from going off the road.

You did it! Show your friends or something.