Klikněte na „Odebírat“ pro stažení položky
Antheia Class Corvette (Repair & Construction)

The Antheia Class is a prototype modified Bia Class corvette. This particular varient is designed for Repair and Contruction (equipped with Welders). This varient is quite uncommon, an rarer varient equips Grinders and acts as a salvage corvette.

Due to Rotors being rotors, sometimes rotors behave like rotors (and explode)... so, be careful.


Piloting notes:
1: Welder Arms (equipped as tool)
2: Welder (Front) (On/Off)
3: Extend/Retract Welder Arms Rotor (LOCK On/Off)
4: Extend/Retract Welder Arms Rotor (On/Off)
5: Rotate Welder Arm Tips (LOCK On/Off)
6: Rotate Welder Arm Tips
7: Start Timer block (Whip's Rotors)
8: Hydrogen Thrusters (On/Off)
9: Merge Blocks Rear (On/Off)
Note: The programming blocks may need to be recompiled/ rerun and the timing blocks restarted when you paste the ship in.


This class is designed to be a functional independent ship within a limited size profile. 12x solid blocks in length, 7x solid blocks wide and 3x solid blocks tall. Each dimension also has lights, LCD screens, catwalks and in some cases windows that extend beyond thus, thus this class can fit within a hangar of size 13x Long by 8x Wide by 4x Tall.
Docking note: the welder arms would need to be retracted to fit within the hangar.


Key components
==============
12x Advanced Rotors (2x large, 10x small)
1x Assembler (2x Speed Modules)
3x Batteries
1x Beacon
2x Cameras (on welder arms)
2x Cockpit (one in hull for piloting craft, but use the front one for welding work)
4x Connectors (1x Front[Not accessible with welder arms extended], 1x Rear, 1x Top, 1x Bottom).
2x Gyroscopes
1x Hydrogen Tank
2x Interior Turrets (Rear mounted)
2x Merge Blocks (Rear)
1x Oxygen Generator
2x Oxygen Tanks
2x Programmable Blocks (Both in use)
1x Remote Control Block
1x Small Cargo Containers
5x Small Reactors
8x Spotlights (Small, on welder arms)
2x Timer Blocks (Both in use)
7x Welders (6x small on welder arms)


Blocks: 193
Grid Mass: 262,581