It works. Try to force update the mod.

I don't know why but I only see the default route advisor. The bar isn't even showing up.

o mod não carrega

The mod loads on 1.55 but I see default route advisor instead modded.

1. open versions.sii
2. insert compatible_versions[]: "1.55.*"
done! thank you~

not supported 1.55?

You are more than welcome!

Thank you Spartan.
With your method i could easily make it working in 1.55 experimental beta .
Kudos to you and Kudos to the maker of that mod. This is mandatory from now on !

Truly love this mod and wouldn't be without it - in fact after a game update first thing I do is hack the manifest to see if it still works - so far so good! Potential improvement suggestion - for a quick glance I find the white speed text a bit lost between the yellow bank balance and the yellow current gear indicator. When over the speed limit there is a red highlight box around the speed. Would maybe a green (or yellow) highlight box be possible when driving at (or under) the speed limit? That would make it stand out better at a glance. Either way, thanks for a great mod!!!

Appreciate the dedication dude!

I updated April 8. Should be fine now.

Glad it works, have fun ;)

yep, the problem was there is only one Dir for both mod. so i take both out and re in and now it works. but i dont understand why it has work in ATS after owner update and in ETS2 not?
thx for all the help ;o)

ok, but why in ATS i got no problem with it with out changing on my side after update in ATS?
the other thing: i got only one Dir for both in workshop?
when i understand it right, i must take both out and re in for effect?

How to MANUALLY (and very easily) update the mod for v1.54! (ETS2 & ATS)

Since the comments section won't allow all my guide to be posted here as it is way above 1.000 characters long - TO ANYONE INTERESTED - just scroll a little bit upwards and within the "Discussions" section, you'll find my post with everything you need to do to manually update the mod and have it working again in no time.

@Backpacker

For some reason, your mod hasn't been automatically updated on the steam workshop since 1.52.

Do as I did (I've just checked for ETS 2), unsubscribe from the mod, check that it has been deleted from your PC. Then re-subscribe, and check your “versions.sii” file again. The missing versions 1.52 and 1.53 must now be added to the “versions.sii” file for ETS2. Add the corresponding line for 1.54 for the mod on ETS 2 and save.

Do the same for the ATS mod and check the .sii file.
Normally, the 1.54 correspondence is already entered

so, this is written in my file:

package_version_info : .150
{
package_name: "150"
compatible_versions[]: "1.50.*"
compatible_versions[]: "1.51.*"
}
}

you can see, there is no 1.52 or else. and so it is written to in ATS and i got no problems in ATS.

when i try what you wrote it dosent works"

Please Update ETS 2 1.54 Thank you :-)

I don't know if I understood your message correctly, but as far as I'm concerned with ETS2, adding the line
compatible_versions[]: “1.54.*”

allows me to have the mod working.

For ATS, I didn't need to do it because it was already up to date.


Here's what I now have in the file: Version.sii for ETS2 and ATS see if you have the same thing. If so, it should work. If the mod doesn't work for you, then I don't know why :/


package_version_info : .150
{
package_name: “150”
compatible_versions[]: “1.50.*”
compatible_versions[]: “1.51.*”
compatible_versions[]: “1.52.*”
compatible_versions[]: “1.53.*”
compatible_versions[]: “1.54.*”
}
}

I can't seem to space the lines in the steam chat:
Package_name 150 and the lines: compatible_version[]: “1.5x.*”
as in the game text file, but you'll understand that you have to leave a space to the left as for the other package_version_info

@Lucus Suisse: on my end it not work. btw the last compatible_versions[]: "1.51.*" inside no 1.52 or 1.53
so how should i do, when the owner self never chance this comandline? i use it on ATS to and there is no compatible_versions[]: "1.54.*" it is the same last entry compatible_versions[]: "1.51.*"?
and it works after update by owner!

Go to:

SteamLibrary/steamapps/workshop/content/227300/965340469
then open the “version.sii” file with Windows Notepad.

Look for the line: compatible_versions[]: “1.53.*”
and add this below:

compatible_versions[]: “1.54.*”


Save the file and close.

Top Mod,Please update! Thank you.

he will update very soon , his a top bloke ;)

This mod does not work in version 1.54. Please update! Thank you.

How can i move the GPS to right slightly? Thanks for wonderful mod :)

Thank you very much

Holy shit, that was quick. Thank you very much!

It has been updated.

Can confirm it, after the HF today, it doesn't work anymore. And the open discussion its not a resolve for my system, can't find the folder "227300". Thanks for updating

1.53 does not take effect, please fix it

Not working on 1.53.

does not show up on 1.53 i love this mod tho pls fix :pray:

coult you make it as optional?

Force update...

1.52. doesn't work, correct loading order (as for years), checked in steam folder, 1.52. is in there, doesn't work though...........

Just updated.

This mod is absolutely brilliant! Thanks for this - now I can have the in-cab GPS running and info about the job at the top of the screen at the same time! Much better than the SCS solution.

thank you

thank you very much ptr1ck !

Force update may be needed. Steam doesn't push workshop updates with priority.

Hello ptr1ck update Not Work

doesn't work anymore for me in 1.51

Why does when I go through the f6-f8 menus the map freezes if its displayed? Idk if its a glitch but if it is can soemeone tell me how to fix it.

Hemil inspired, but the code is different.

Locations of the elements, such as the bars aren't easily moved.

@4L3XG4R0F0 I think the mod is originally made by hemil. See this: https://forum.scssoft.com/viewtopic.php?t=234726

Are you the one who made this mod? @ptr1ck, I have a specific use that would need to change the map to appear only when looking at the back seat of the truck is it possible to make the mod work like this?

love this mod, but it does overlap my Macbook notch, is it possible to allow a slight shift downward? (about the same height as the bar)
will use the bottom bar version for now

A thousand times thank you, for the
update and for your time and effort
as well as sharing your work with us.

Thank you so much

Thank you. The mod is updated now. Force update may be required.