Subscribe to download
SBS TEMPEST Fuel Rod Package

anywho thank you for being very responsive and help full

there could be a way to do it easly with somesort of attachment that can lock into place with electrical connectors then lower in the fuel assembly

Hi Line. You may be missing a switch activation for one of the connector release/engages. I'll see again if I can put together a video for that. It is very manual process that I haven't had time to automate. There's a lot to it so I was thinking to leave it manual, i.e. changing fuel rods should only be done by "professionals". I'm going to put that caveat in. :)

Hi line, I'll see if I can put together a video. I was able to use the Lulu to do a refuel at sea and it took about 15 minutes when I arrived. It took a bit of time to get things line up. It'd definitely a lot easier when using the gantry at port. I just ran a test and was able to do a load and unload of the fuel pack in about 2 minutes.

so i did manage line the fuel rod connector up with the lift arm but it refuses to connect whats so ever all of the connectors seem to be doing that but i did manage to just push it onto the sled and push that into the reactor and activeate the reactor

the issue im having is im trying to refuel out at sea and it acts like it has a magnet that makes it not wana line up the correct way

Hi line. It's not possible to put it on all sides as it would make the package too large. As for refueling I was able to do it using the Creative Island Gantry crane that I revamped in about 2 minutes.

https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=3001487560

it needs the hard point on all sides to function properly when refueling otherwise it will take 4 hours and never face towards the connector