Subscribe to download
Zil-ATV "Zipo"

Operation Manual

1. Start with "Key"

2. Don't overload the engine or it will shut off

3. This is meant to be used with the Zil-4906 " Bluebird" as cargo, the truck does not float with this loaded\

4. Loading and Unloading are pretty simple once you do it a few times so here's a little instruction text,
1. Use the select tool to load the ATV onto the truck in the designer
2. Once loaded connect the ATV with ropes to the truck to secure it
3. To Unload open the control door and start by Unhooking the ATV and Activating the P-Brake
4. Attach the ATV to the cranes using the rope anchors
5. Make sure there is acceptable slack in the rope and then move the cranes to a 90° angle
6. Tighten winches until ATV is floating and then extend the pistons fully
5. Rotate the pistons until the ATV is over the side and then lower it
6. Unhook ATV from winches and return them the there resting spot
7. To Load the ATV do this in reverse essentially it should be pretty self explanatory
8. You can contact my discord In my bio for extra help.

Info About Real ATV

This really isn't a replica its just meant to go with the Zil-4906 "Bluebird" as a fun cargo toy.

Building Process

This was a replacement for the cargo on the Zil-4906 "Bluebird" I built this after I realized that I could not build this [en.m.wikipedia.org].

Thank You For Taking The Time To Read And Download This Creation, I Hope You Have A Great Day