Stormworks: Build and Rescue

Stormworks: Build and Rescue

Няма достатъчно оценки
LNER A4 "Mallard" - 4468 [Steam Locomotive]
   
Награда
Добавяне към любими
В любими
Премахване от любими
Размер на файла
Публикуван на
Обновен на
1.385 MB
18 ян. в 13:20
17 март в 8:04
3 бележки за промени ( преглед )

Абониране, за да се свали
LNER A4 "Mallard" - 4468 [Steam Locomotive]

В 1 колекция от Felix
Felix’s Locomotive Works & Railway
12 артикула
Описание
LNER A4 "Mallard" - 4468



Please provide description of any bugs found in the comments!

This is a recreation of the famous Mallard[en.wikipedia.org] steam locomotive done in its LNER Garter Blue livery as to it's current standards in the National Railway Museum in York, England.

If you would like to find me for any reason you can find me under the username @felixmountain on the Stormworks Official Discord[discord.gg] server.



Startup
  1. Request Master (Keep toggled on
  2. Ignite Firebox (Keep toggled on
  3. Raise firebox set temperature (Recommended 200°C)
  4. Set Piston Throttle to 1
  5. Set Steam Injector to 1
  6. Regulator Up
  7. Reverser Up
PS: Cylinder C0cks should be pulled before movement for true realism!



Specifications
  • Steam Chest Pressure: Displays steam pressure of steam wheel pistons.
  • Steam Injector Gauge: Shows the steam pressure of the steam powered injector pump.
  • Steam Injector: Allows water to fill the boiler, steam pistons must be running (Keep boiler water around red line, Runs best when not full)
  • Cylinder C0cks: Should be drained (Set to 1) before moving, Changes steam from coming out by wheels (0 on throttle) when regulator applied to coming out smoke stack (1 on throttle) when regulator applied.
  • Pistons: Steam powered generator, powers pumps, etc.
  • Brakes: Brakes of the locomotive - Spawns at 1
  • Tender Brakes: Turn crank to raise/lower the brake pressure for the tender
  • Regulator: Controls steam flow to the reverser & therefore indirectly the wheels through the Reverser
  • Reverser: Throttle of the locomotive
  • Crank: (Located at end of steam wheels under cab) Moves train forwards or backwards when button directly below clicked
  • Whistle: Turn the valve above firebox for whistle.
  • Odometer: Tells you how many miles you have travelled.
  • Dump Steam: (Located under the forward steam wheels) Dumps the steam pressure in the wheel steam system
  • Master Locomotive: Indicator that the locomotive is in control of the entire train, Must be Master for controls to work!



Technical Information




Dimensions
  • Length: 19.50m (78 blocks)
  • Width: 2.75m (11 blocks)
  • Height: 4m (16 blocks)



Credits



Do not reupload any part of this creation without specific allowance.

9 коментара
THESAABJAS39 15 юли в 10:46 
it looks a little too short
Felix  [автор] 23 март в 15:40 
@croatiacountryball It's already on the list to build but I'm currently focused on building some Irish diesel & steam loco's
croatiacountryball 20 март в 9:58 
this is epic! maybe you can build lner a1 peppercorn class 60163 "tornado"?
Felix  [автор] 17 март в 8:06 
@mtischer1 It's the NSO modpack, you can find it on the workshop here and I highly recommend it!
Felix  [автор] 17 март в 8:05 
@Sora7776 & @Sphinx Thanks for telling me about the reverser! I just completely missed it in my testing somehow, it's fixed now.
Sora7776 26 февр. в 17:08 
@Sphinx i am also having that issue. The reverser lever will show its going into reverse but the micro controller will not put it in reverse.
mtischer1 4 февр. в 9:00 
i have a question on the pichtures. i mean where dit you get thos in the map? or was it just edit?
loganstab122731 23 ян. в 14:55 
wut
Sphinx 20 ян. в 11:51 
how do you throw it into reverse, I tried turning the reverser down all the way, but it still only moves forward.