商店頁面
Stormworks: Build and Rescue
全部 討論區 螢幕擷圖 藝術作品 實況直播 影片 工作坊 新聞 指南 評論

Stormworks: Build and Rescue

商店頁面
Stormworks: Build and Rescue >  工作坊 > Felix 的工作坊
評價次數不足
LNER A4 "Mallard" - 4468 [Steam Locomotive]
介紹 討論區0 留言9 更新註記
   
獎勵
加入最愛
已加入最愛
移除最愛
Vehicles: Vehicle, Rescue, Multi-vehicle, Exploration, Delivery, Technical, Creative, Land, Mechanical, Advanced, Train
標籤： v1.14.1
檔案大小
發佈於
更新時間
1.385 MB
1 月 18 日 下午 1:20
3 月 17 日 上午 8:04
3 項更新註記 （檢視）
所需的項目
此項目需要下列所有項目
建立者
Felix
離線
查看 Felix 與其他人建立的所有 53 個收藏（有些可能設為隱藏）
1,956 不重複訪客人數
2,031 目前訂閱人數
21 目前最愛人數

訂閱以下載
LNER A4 "Mallard" - 4468 [Steam Locomotive]

在 Felix 的 1 個收藏中
Felix’s Locomotive Works & Railway
12 個項目
描述
LNER A4 "Mallard" - 4468



Please provide description of any bugs found in the comments!

This is a recreation of the famous Mallard[en.wikipedia.org] steam locomotive done in its LNER Garter Blue livery as to it's current standards in the National Railway Museum in York, England.

If you would like to find me for any reason you can find me under the username @felixmountain on the Stormworks Official Discord[discord.gg] server.


Startup
  1. Request Master (Keep toggled on
  2. Ignite Firebox (Keep toggled on
  3. Raise firebox set temperature (Recommended 200°C)
  4. Set Piston Throttle to 1
  5. Set Steam Injector to 1
  6. Regulator Up
  7. Reverser Up
PS: Cylinder C0cks should be pulled before movement for true realism!


Specifications
  • Steam Chest Pressure: Displays steam pressure of steam wheel pistons.
  • Steam Injector Gauge: Shows the steam pressure of the steam powered injector pump.
  • Steam Injector: Allows water to fill the boiler, steam pistons must be running (Keep boiler water around red line, Runs best when not full)
  • Cylinder C0cks: Should be drained (Set to 1) before moving, Changes steam from coming out by wheels (0 on throttle) when regulator applied to coming out smoke stack (1 on throttle) when regulator applied.
  • Pistons: Steam powered generator, powers pumps, etc.
  • Brakes: Brakes of the locomotive - Spawns at 1
  • Tender Brakes: Turn crank to raise/lower the brake pressure for the tender
  • Regulator: Controls steam flow to the reverser & therefore indirectly the wheels through the Reverser
  • Reverser: Throttle of the locomotive
  • Crank: (Located at end of steam wheels under cab) Moves train forwards or backwards when button directly below clicked
  • Whistle: Turn the valve above firebox for whistle.
  • Odometer: Tells you how many miles you have travelled.
  • Dump Steam: (Located under the forward steam wheels) Dumps the steam pressure in the wheel steam system
  • Master Locomotive: Indicator that the locomotive is in control of the entire train, Must be Master for controls to work!


Technical Information



Dimensions
  • Length: 19.50m (78 blocks)
  • Width: 2.75m (11 blocks)
  • Height: 4m (16 blocks)


Credits


Do not reupload any part of this creation without specific allowance.

9 則留言
< >
THESAABJAS39 7 月 15 日 上午 10:46 
it looks a little too short
Felix  [作者] 3 月 23 日 下午 3:40 
@croatiacountryball It's already on the list to build but I'm currently focused on building some Irish diesel & steam loco's
croatiacountryball 3 月 20 日 上午 9:58 
this is epic! maybe you can build lner a1 peppercorn class 60163 "tornado"?
Felix  [作者] 3 月 17 日 上午 8:06 
@mtischer1 It's the NSO modpack, you can find it on the workshop here and I highly recommend it!
Felix  [作者] 3 月 17 日 上午 8:05 
@Sora7776 & @Sphinx Thanks for telling me about the reverser! I just completely missed it in my testing somehow, it's fixed now.
Sora7776 2 月 26 日 下午 5:08 
@Sphinx i am also having that issue. The reverser lever will show its going into reverse but the micro controller will not put it in reverse.
mtischer1 2 月 4 日 上午 9:00 
i have a question on the pichtures. i mean where dit you get thos in the map? or was it just edit?
loganstab122731 1 月 23 日 下午 2:55 
wut
Sphinx 1 月 20 日 上午 11:51 
how do you throw it into reverse, I tried turning the reverser down all the way, but it still only moves forward.