Abonner for at downloade
Scania NG Drivetrain

This mod adds 9 engines from Scania's new range, as well as the new G25, G33, G38 and GRS/O gearboxes for the 2016 Scania S & R.

13- Liter-Motor
- DC13 166 540 Euro 6 (397 kw) - 2700 Nm

13-Liter-Motor Super*
- DC13 176 420 Euro 6 (309 kw) - 2300 Nm
- DC13 175 460 Euro 6 (338 kw) - 2500 Nm
- DC13 174 500 Euro 6 (368 kw) - 2650 Nm
- DC13 173 560 Euro 6 (412 kw) - 2800 Nm

* The new super engines use up to 8% less fuel.

16-Liter-Motor
- DC16 120 530 Euro 6 V8 (390 kw) - 2800 Nm
- DC16 121 590 Euro 6 V8 (440 kw) - 3050 Nm
- DC16 122 660 Euro 6 V8 (495 kw) - 3300 Nm
- DC16 123 770 Euro 6 V8 (574 kw) - 3700 Nm

2x RPM limiters were also installed: 1. Neutral 1450 rpm
2. In gear 2450 rpm

Old transmission GRS/O included.
- GR875 /R
- GRS895 / R
- GRS/O 905 /R
- GRSO 925 / R
- GRSO 935 / R

The G25CM/R, G33CM/R and G38CM/R have been added.
- The G25 is for engines up to 460 hp.
- The G33 for engines up to 660 hp.
- The G38 for engines from 660-770 hp.

New drive axles have been added.
- The Scania R756 rear axle replaces the R665 and R753 models, as well as most Scania R780 axle applications.
R756 Gear ratio: 1.95 ; 2.12 ; 2.31 ; 2.53 ; 2.71 ; 2.85 ; 3.08 ; 3.36 ; 4.11

R780 axle included.
-All older transmissions are equipped with an R780
R780 Gear ratio: 2.59 ; 2.71 ; 2.92 ; 3.08 ; 3.27 ; 3.42 ; 3.80 ; 4.25 ; 5.25

There are 166 gearboxes in total!