Klikněte na „Odebírat“ pro stažení položky
Airlock Control

v:0.976 (01.201 compatibility, fix wrong text length on corner LCDs & take LCD text padding setting into account)
In-Game script by MMaster & Morphologis

Last update: Fixed LCD flicker
* Fixed timing to improve airlock response times
* Updated for 01.186 version of game
* Timer block is not required anymore!
* (look at extra features section below)

• Any number of airlocks using single programmable block & timer
  
• Any number of doors per airlock (can be used with Hangar Doors)
  
• Any number of airvents per airlock (so you can use it for large airlocks)
  
• Automatic pressurization / depressurization with optional pressure detection in rooms behind doors
  
• Doors automatically closed & locked / unlocked & opened
  
• Lights changing colors based on state of airlock
  
• Play sound blocks when airlock is pressurized, depressurized or in both cases
  
• LCD display support to display state of any number of airlocks on any LCD
  
• Unlocks doors without opening when airlock can't be depressurized / pressurized
  
• 3 button actions support: transfer to inner doors, outer doors or switch between them
  
• Airlock can be also controlled by switching 'Depressurize' on airvents
  
• Supports all official Space Engineers languages

NO PROGRAMMING NEEDED.

* https://www.youtube.com/watch?v=viWsqLvqkAM

If you like this script please give it positive rating, if you don't like it then please tell me why and I will try to fix it or learn from it. Thank you!

* Load script to programmable block, Check code, Remember & Exit

Note: Airlock name mentioned below is name of the airlock that you can choose. Replace any mention of Airlock name by your chosen name for your airlock. You should have all 3 groups with same Airlock name unless you know what you are doing.

Setup 3 groups per airlock like this:
Group named "Airlock Control: Airlock name" should contain:
- airvents inside airlock
- lcds that should show this airlock state [optional]

Group named "Airlock Inner: Airlock name" should contain:
- inner doors (opened when airlock is pressurized)
- lights for showing inner door status [optional]
- sound block played when airlock is being pressurized [optional]
- [optional] place airvent behind inner doors and assign it to Airlock Inner group to let airlock automatically figure out what should be the pressure when opening inner doors

Group named "Airlock Outer: Airlock name" should contain:
- outer doors (opened when airlock is depressurized)
- lights for showing outer door status [optional]
- sound block played when airlock is being depressurized [optional]
- [optional] place airvent outside of outer doors and assign it to Airlock Outer group to let airlock automatically figure out what should be the pressure when opening outer doors

Setup buttons to Run Programmable block with argument (without quotes!):
"Airlock name in" - transfer to inner doors (pressurize)
"Airlock name out" - transfer to outer doors (depressurize)
"Airlock name toggle" - switch between inner doors / outer doors

"Airlock name" is name of your airlock! If your airlock is called ABC then use "ABC in", "ABC out" etc.

You can build single sound block and add it to both Inner and Outer group
to play sound each time airlock changes state (e.g. hissing sound).

* Done.

Blinking Red - these doors will open when airlock is (de)pressurized
Red - these doors are locked
Orange - doors unlocked, but not opened when airlock cannot be (de)pressurized
This usually happens when you don't have enough oxygen to pressurize airlock or you don't have enough tanks to depressurize it.
Green - doors unlocked and opened

- Make sure that your own everything!
- Make sure that you used the same Airlock name in all 3 groups for single airlock.
- Always make sure that there are only the blocks that are supposed to be in the groups.
- If your doors are opening immediately as you cycle the airlock, make sure that you didn't put the airvent inside the airlock to one of the Inner / Outer groups.

Place airvent behind inner doors and assign it to Airlock Inner group and also place airvent
outside of outer doors and assign it to Airlock Outer group to let airlock automatically figure
out what should be the pressure when opening inner and/or outer doors.

NOTE: You are now able to change colors of the lights:
Change color of lights in script LIGHT COLOR SETTINGS when you click EDIT in programmable block with this script and scroll down the guide.

Add closing time to doors name to make sure doors are closed before locking them by adding "CT:seconds":
* if your doors are named "Hangar Door 3" rename them to "Hangar Door 3 CT:10" to set closing time to 10 seconds
* if your doors are named "Door 3" rename them to "Door 3 CT:5" to set closing time to 5 seconds

Tell the script to open the doors after some time even if pressure is not right in the airlock:
Change line "MMConfig.OPEN_ANYWAY = false;" in Configuration() section at the beginning of the script
to "MMConfig.OPEN_ANYWAY = true;" (without quotes)

Programmable block needs to be have the same ownership as all the other blocks you want it to control.
So all doors, lights, airvents, sound blocks, buttons and LCDs need to have the same owner as programmable block.

This script is not a mod so it does not update by itself. You need to load new version of script to your programmable block to overwrite the old one. You do that in exactly the same way as when you first loaded the script into programmable block.
Open your programmable block, click Edit, click Browse Workshop, select Airlock Control, click OK, Check code, Remember & Exit. Done. Your script is now updated.



Morphologis for this idea, his help with debugging this script and for his support of community & awesome videos!
Make sure to check out his YouTube channel:
https://www.youtube.com/user/Morphologis

Also thanks to Direwolf20 for fix to depressurization on load issue.

https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=822950976

https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=419465037

https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=423346486

https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=415051704

https://steamhost.cn/steamcommunity_com/workshop/filedetails/?id=419124752

https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=431420571


Watch MMaster's Steam group: https://steamhost.cn/steamcommunity_com/groups/mmnews
Youtube Channel: https://www.youtube.com/user/MattsPlayCorner1080p
Twitter: https://twitter.com/MattsPlayCorner
and Facebook: https://www.facebook.com/MattsPlayCorner1080p
for more crazy stuff in the future :)