Start off at Dundee Park, in this Freight QD with 2 of the following in any combination: Box Car, Wood Chip Car. Deliver to Atlantic Coast fibers and Passaic Woolen. Return empties via Monroe Street to the Garfield Siding.

At Harlem Station in the Bronx, unload the car float and load the car float with empties for the return to Weehawken, NJ

Special Note: User RudiJaeger repainted DTM's Boston & Maine 44-Tonner

Buy it here if you dont have it: https://steamhost.cn/app/222548/Train_Simulator_Boston__Maine_GE_44_Loco_AddOn/

Rudi's repaint is here: http://railworksamerica.com/index.php/download-library/engine-repaints?view=document&id=2989:ge44t-bergen-pack&catid=18:engine-repaints

Special Thanks to RudiJager for recreating both the Erie and Erie Lackawanna 44 Tonner Number 26. Number 26 was the unit used at Harlem Station and Rudi's model was the inspiration to build this unique location.

From Hillburn, use a lone road switcher to pull a string to Tallman NY and return your own. Build your own consist, of 2 of the following in any combination: Box Car Pharmaceuticals, Box Car Kraft Paper, Box Car Beer or Lumber. Return Empties to Hillburn

Depart Hoboken following the East Bound track to CH - 87 miles
You can also chose other Depart and Destination points for shorter runs.Passenger runs are preceded by a number followed by the station name. The higher the number the further West you are away from Hoboken. Remember a full run of the line can take over 2 hours.

Depart Port Jervis for a morning commuter run to Hoboken - 94 miles
You can chose other Depart and Destination points for a short run. The lower the number proceeding the station name, the closer you are to Hoboken. Note also that each station has a 3 character label associated with the particular line that operated.
BCL - Bergen County Line (Hoboken to Suffern, NY)
PJL - Port Jervis Line (Suffern to Port Jervis, NY)
PVL - Pascack Vally Line (Hoboken to Woodridge, NJ)

Start in Elmwood Park NJ, on the NYS&W, light or with a short string. Drop off at the yard, locate some empties from Passaic Jct - Stop at Rochelle Park.

All freight runs are proceeded by the letter (F) for freight and a number. The lower the number the further East you are. Note that F6. Mill Rift, PA only goes 5 miles to the Division Point at Port Jervis. Note while there is no switching generally, you could grab cars at Campbell Hall and take them to the Walden or Maybrook branch lines. This is possible because of the manual switches.

All freight runs are proceeded by the letter (F) for freight and a number. The Higher the number the further West you are. At Croxton yard there is opportunity for some switching via "Merchants Lead" which is just North of the yard, and is accessible from manual switches.

Hello and thank you for making this awesome route. I downloaded it yesterday after driving up Rt 17 yesterday from Suffern, so cool to see places you just driven past in TS2019!! I am a newbie when it comes to workshop routes. How to I use these "Quick Drives"?? I've downloaded all of the prerequisites and additional content (costly but I hope it will be worth it!!). Thanks and I appoligize in advance for my ignorance..

danielt - when you see how it works, you will wonder why you didn't figure it out in the first place.
QDs are different as they are not Scenarios
First Go to DRIVE. Then Click the QUICK DRIVE tab, Select the Route "New York Division Bergen Line (The 2nd box under the loco box). To the right select your departure point. Most are labeled "fright" "local" 'use light engine' the rest are passenger. Then you click your destination. (VIA) means a waypoint, (DEST) is short for Destination) Use the 9 key for the map to check if you need to switch before your start, and check again at your destination. In QDs you can control any manual switch. Last, is to select your train, many trains already have consists already. If you want to build your own click custom and assemble the train. Last is to select the season, weather and time of day. With all of this done. you can click the start button. As this is the Bergen and has lots of assets, it can take 4 minutes to load before you get rolling. So my route takes some patience, but its worth it.

Do post to tell me how you made out, your impressions and all that good stuff. I love feedback, but I love the new guys most of all, because the first run can be pretty awesome!

OK... Here we go!!

Take Pictures ! =)

Hey just a heads up, I think the QD that starts out of Port Jervis to Hoboken is buggy. I couldn't get it to load with any combination of rolling stock, but I was able to get a QD out of Otisville to load up just fine.

I will check that out tomorrow...I will find out what I messed up!

All QD descriptions have been updated to their FINAL configuration as of 7 July 2021