(All work over wifi channel 0, unless the button to lock the terminal is used)

---- MISC COMMANDS: ----

silent <on|off>
Limits engine speed to a minimum, disables fabricators and puts the reactor on standby. Does not disable organic noise sources, crew should remain stationary or walk slowly.

floodlevel <1...100>
Automatic duct blocks will close if the water in the room below reaches this level. Doesn't affect ducts that drain into ballast tanks or bilges. Default: 20

lifesupport <on|off>
Disables all O2 production (including suit lockers) and lights aboard the ship. Lowers power consumption, and will slowly extinguish fires and you.

rename left <name> / rename right <name>
Set the display name for the left/right railgun loader. Max 30 characters (more than 9-10 will result in scrolling text). Default: A/B

message <text>
Enter a message that will be displayed across the ship. It will be appended to previous entered messages. Each entry can be up to 190 characters long, and the complete text 1000 characters.

delete message
Erases all displayed messages.

color <normal|alarm|silent> <R,G,B>
Set the light color for each condition (values must be between 0 and 255, and comma-separated). Use these commands to reset colors to default:
color normal 200,170,140
color silent 25,25,255
color alarm 255,25,25

brightness <0...255>
Set the general brightness level for lamps.

---- UPGRADE COMMANDS: ----

reactorlevel <0...3>
Set upgrade level for reactor power output.

capacitorlevel <0...3>
Set upgrade level for the charge rate (NOT the capacity) of supercapacitors.

batterylevel <0...3>
Set upgrade level for battery charge rate (NOT capacity).

--- TALENT RELATED UPGRADE COMMANDS ---

buzzin <on|off>
Use "buzzin on" if there is an engineer with that talent on board (let the reactor controller know about the 10% power bonus).