Plauderville West of Platform - Between BT Junction and Plauderville. 3 Tiles meet here and there is a disparity between the tile counts going West to East: +00001-000024 is 2761 ,+00001-000025 is 2024 and +00001-000026 is 2504. Be careful with timing AI and your train through this tiles.

TIP: Hoboken has over 3900 assets in it BEFORE you add your trains. Be conservative. My testing shows you can safely run your player train and add 3 locos and 15 cars maximum to the terminal before it starts to get unstable. Keep this in mind when building. However, I just drove a scenario with 10 consists and over 10,000 assets, I ran at 6fps but didn't crash.

Signal before HX Draw for Yard Entry to Croxton does NOT have divergence set AND has a 20mph restriction over the crossover.

Solution:

In freight scenarios entering Croxton from west, issue a Message from HX tower to stop at the signal before HX draw for permission to enter the yard.
The driver will see the green signal.

2nd Message from HX Tower would give permission and advise 20mph max speed after the signal. That would work.

*ALERT* Broken Rail found at the Croxton Lead. If you route freight to HX on Track 2 you will get an impassible double read at HX in your scenario.

*SOLUTION*
For ingress to Croxton Yard - From Rutherford OR the NJ&NY Branch:
STEP: Route the Train to Track 1 at HB East Track 1. This will give you a Green to the Yard.

*ALERT* Ingess to Suffern Yard and Hillburn will give you a Hard Red Signal - No penalty, but check in your scenario testing.