what flysky controller exactly?

i have fs i6 and upgraded its firmware to the 10ch variant and set it up using the usb cable like this
https://www.amazon.com/Xiangtat-Download-Transmitter-Controller-Firmware/dp/B089Q3ZK5B

it is not seen in windows as a controller, just a hud


may be better off looking at rc forums for help with it

most games will not be able to see the controller since it does not use dinput or xinput

there are a few rc drone/plane sim programs that can use it in usb mode

Originally posted by Bad 💀 Motha:

https://www.youtube.com/watch?v=BJd4_e9bPDs

thats the receiver and flight controller, not flysky transmitter/controller

https://www.youtube.com/results?search_query=flysky+transmitter+and+receiver+binding

i think the op wants to just connect the controller/transmitter directly to a pc

not sure what he wants to do beyond that

they are not seen as 'game controllers' just 'human input devices'

if he wants to save or apply settings or update firmware, just run its software to do that using the controllers usb cable/adapter/port

or drone sim or flight controller programmer can use it through the flight controllers usb port, as long as the receiver is powered using drone battery or from the flight controller when its powered from the pc va usb


tx -> usb -> pc
to update firmware or save/load settings to the controller

tx -> rf -> rx -> data(single digital sbus/ibus or multiple pwm signals) -> flight controller -> usb -> pc
to program the flight controller or use on some flight sim software

I it got but still not working quite as it should. Controls are backward and a few other things so I'll get it worked out.

Thanks for the reply's

in the controller you can set the min/max limits for each stick/switch and/or reverse them
or map them to different axis/switch

be sure to use a different profile for the sim software than the rc drone/craft

Using a Flysky, I have it working had to reverse most channels. Chanel 5 is a 3 position switch but it only lets my fly in expert mode.
Or is there another way to change to a different mode?

what model tx are you using?

depending on the controller, you should be able to remap any switch/stick to any axis

but be sure to copy/save profiles before messing with them

Flysky FS I6X
I had to calibrate the transmitter to RF Trainer and save it with out channel 5. I have my real ArroScout plane channel 5 is my 3 position for beginner, Int, Exp the RF plane only takes off if in the EXP position.

are you using it with the controllers usb cable, or usb port on the flight controller?

Yes
Sorry. USB Cable