Case: Phanteks NV9 V1

PSU: ROG Thor II 1000w Platinum

Motherboard: ASUS ROG Crosshair x870E

CPU: Overclocked 9800X3D

GPU: Overclocked ASUS ROG 5080 Astral OC (OC/Slient switch is in the OC position)

RAM: Overclocked DDR5 Kingston Fury Beast 6400MHz 2x32 Dual kit (SK Hynix, A-Die, 2R (Dual Rank))

CPU Cooler: All In One Arctic Liquid Freezer III Pro 420mm

Monitor: Samsung Odyssey G9 5120x1440p 240Hz Gsync

Keyboard: Wooting 60HE

Mouse: Razer Viper V3 Pro w/ Super glide speed skates | Logitech Pro X Superlight V2 Dex (weight modded to 54g)

Mouse Pad: Artisan Raiden XL mid hardness | Wallhack SP-004



WARNING : ( DO NOT Attempt to copy these overclocking settings as they could cause serious damage to your hardware !)

(I went through multiple days of testing to be sure that these settings are safe and stable for my hardware. Each CPU, GPU and RAM stick is different and even between same makes of CPU, GPU and RAM Over Clocking performance can vary wildly and these settings may in the best case corrupt your PC and worst case irreparably destroy your hardware. These settings are just for the curious.)

Overclocking Specifics:

(EXPO): EXPO 1 Enabled

CPU:

(PBO Boost): +200MHz

(PBO Limit): Motherboard

(PBO Scalar/FIT): 10x

(F-Clock): 2200MHz

(U-Clock): 3000MHz / U-Clock = Mem Clock

(E-Clock Mode): Async

(B-Clock 1) : default / 100

(B-Clock 2) : 102.5

(Infinity Fabric:Memory Controller:Memory) Ratio = 2200:3000:3000

Final CPU boost clock speed measured at 5.6GHz all core in the finals and 5.5 GHz in y-cruncher, OCCT & Cinebench R23

(To avoid a clump of text longer than the Berlin Wall I'm only going to include only a few memory timings)

RAM:

(Motherboard Compatible RAM): Yes

(Enhanced Compatibility): Enabled

(RAM Frequency): 6000MT/s (3000MHz)

(VDDQ Voltage:) 1.410 V (Volts)

(ASUS Memory Preset): Hynix 6400MHz 1.4 2x32GB DR

(tCL): 28 - (tRCDrd) 34 - (tRCDwr) 34 - (tRAS) 62 - (tREFI) 23354

The reason why my RAM is running at 6000MHz with tighter timings instead of just the EXPO rated 6400MHz is because my CPU memory controller can't handle memory speeds above 6200MHz even at default settings with EXPO enabled or at default settings with EXPO and Enhanced memory compatibility enabled.


GPU Overclocking software is GPU Tweak III

(Enhanced Overclocking Range): Enabled

(Power Target): 112%

(GPU Voltage): 100%

(GPU Boost Clock): 3050MHz (+290MHz)

(GPU Memory Clock): 34202MHz (+4200MHz)

GPU side notes:

While my memory clock can go higher (up to +6000MHz) I found significant FPS losses going higher than 4200MHz

While I usually use MSI Afterburner for my GPU Overclocking the 5080 Astral comes with 12V High Power pin monitoring and a warning system built into GPU Tweak III to warn if the connector is experiencing excessively high pin load. With the 12V High Failure connector being a not insignificant risk I decided to stick with GPU tweak.

For reasons I'm far too stupid to understand GPU tweak III shows the memory clock as being double what MSI Afterburner reads (example MSI Afterburner displays memory clock speed of 17101MHz while GPU Tweak III displays a memory clock speed of 34202.) So my MSI Afterburner memory clock speeds read as 17101MHz (+2100Mhz))

As if that wasn't strange enough GPU-Z displays the memory clock speed as being 1/16th of what GPU Tweak III displays (rounded to the nearest integer) and 1/8th of what MSI Afterburner displays (rounded to the nearest integer).

._.