Subscribe to download
Programmable Pattern Maker

by Steve's Makerspace
Reuqires The Modpack: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=881254777

Youtube video about it:
https://youtu.be/jrDe83CoMo4

A bit laggy, but don't weld it. Strip off the patterns and load one in front of the bank of scanners. The lift will fit in the hole in front of them.

Look up for the seat. After getting in, look down and put the logic gates shown toward the bottom. When I refer to left-right, up-down, it means the bottom right quadrant for mode 1. For the other 4 modes, the primary movement area is defined by the dark gray strips. (You should just watch the video.)

1 - Turn screen on. Also if you get blinking lights, turn off for about 3 seconds, then turn back on.
2 - Turn on the program.
3 - Shift modes. Mode 1 is a simple pattern maker, and the other 4 modes are more complex.
4 - Move left one.
5 - Move right one
6 - Move up one
7 - Move down one

You can also add or subtract wood blocks to create your own pattern.

Also see the Pattern Maker with Randomizer:
https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1133445004

Uses Brent Batch's shift register:
https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=759784744
(NOTE: it needs a little re-wiring to work from spawn)

Brent's channel:
https://www.youtube.com/user/dutchminecraftian99