A collection of metro stations based on the original “simple intercity metro” station by Fishbus. The collection consists of stations with platforms at three depths. A platform at level 1 (L1) is at the default depth, level 2 (L2) is one step down from the default, and level 3 (L3) is two steps down from the default.

The snapshots contain codes to show how each metro station is configured. In the upper right corner is one of the following codes: P1 is for single platform; P2 to two platforms; P3 for three platforms; and P4 for four platforms. In the lower left corner is a representation of the platform stations. The street is oriented towards the bottom of the image with level 1 (L1) platforms in red, level 2 (L2) in green, and level 3 (L3) in blue. The tooltip and snapshot images show each metro station in an underground view to highlight the orientation of the station to the road.

For single platform (P1) metro stations there are configurations for 0 degrees (parallel to the road), 45 degrees, 90 degrees (perpendicular), and 135 degrees. Each comes with a separate station at all three levels.

For dual platform stations there are stations at 0 degrees and 90 degrees as well as a simple cross of 0 degrees and 90 degrees. The platforms are at L1 and L2.

For three platform stations the tracks is one platform at 0 degrees and two platforms at 90 degrees.

For four platform station has two platforms at 0 degrees and two platforms at 90 degrees.

There are no mods required to use any of the metro stations. However, on the multi-platform metro stations there are times where when placing transport lines the game reports that no path can be found. To overcome this anomaly continue placing the line through the platform by continuing on to the next metro station. Repeat for metro lines through the remaining platforms. Once all metro lines have been placed through each platform you can come back and add stops. If the game still reports that no path can be found attempt to add stops on the other platforms within this metro station first and then return to the platform causing the anomaly.

I made these since there are many occasions where I wanted metro stations are different depths than the default. Thanks to all the contributors there were many station designs to chose from and I chose the very popular “simple intercity metro” station by Fishbus for these metro configurations. I hope you find them useful.