Steam Workshop::2.1.2 - Airport Props, Transport Plane by Ayki

Created by bearafly

Goldhofen AST-3 Towbarless Tractor ( with illumination ) The towbarless aircraft tractors in the AST-3 series can handle all aircraft movements up to 220 t MTOW (ERJ135 - B767-400) more quickly, flexibly and cost-effectively than ever before. The AST-3 F i...

Airport Fuel Hydrant Truck [Prop]

Created by vasimr22

A fuel hydrant truck for large airports. These trucks contain fuel pumps which connect to fuel lines that run under the ramp. These are also sometimes referred to as pump trucks. This model contains a fairly high tri count at 1828 Tris (due to the pump and...

UK electricity box

Created by Sparks

UK electricity box by Sparks...

Runway Threshold Lights Prop

Created by AmiPolizeiFunk

** 12.10.2019 update: Check these out: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1887319182 vasimr22 & I collaborated to create this functioning airport asset, using boformer's script to add lights to a prop. These four lights are meant to go ...

Small Airport Fuel Truck

Created by vasimr22

A fuel truck for a small airport. This model is based off a truck that contains 1x under-wing fuel line (for larger jets), and 4x over-wing fuel lines (for smaller propeller based aircraft - helicopters too). This model contains a fairly high tri count at ...

Airport High Intensity single light [Prop]

Created by vasimr22

A single high intensity light prop for an airport. This model is low to the ground (so that aircraft wings can pass over it), and is slightly angled upward. Uses the same texture as the approach lights on my workshop. Low poly model with 115 Tris and a 64x...

High Security Barrier (Lowered)

Created by vasimr22

A high security barrier in the lowered position. These are used instead of gates, as they will destroy any vehicle that attempts to ram them. The preview image appears to be missing, because the model was placed lower than the origin to allow it to sit flu...

High Security Barrier (Raised)

Created by vasimr22

A high security barrier in the raised position. These are used instead of gates, as they will destroy any vehicle that attempts to ram them. The preview image shows the model in the ground, because the model was placed lower than the origin to allow it to ...

Airport Pushback

Created by vasimr22

A pushback tractor for an airport. This kind of pushback is used in conjunction with an aircraft towbar to push an airplane out of a plane stand (they can also be used to tow aircraft using a towbar). This model contains 450 Tris with a 256x256 texture and...

Airport FAA Shelter

Created by vasimr22

Airport FAA Shelter prop. A small checkered structure for housing ground aviation navigation equiptment. Low poly model with low poly LOD....

Airport Deicer

Created by vasimr22

An airport de-icer for removing ice and applying anti-freeze agent to aircraft during the winter. This model contains 900 Tris with a 512x512 texture, and a 250 Tri LOD mesh with a 64x64 texture....

Airport Deicer Extended

Created by vasimr22

An airport de-icer for removing ice and applying anti-freeze agent to aircraft during the winter. This model contains 900 Tris with a 512x512 texture, and a 250 Tri LOD mesh with a 64x64 texture....

Airport Belt Loader

Created by vasimr22

A belt loader for an airport. These are used to load baggage into the cargo hold of passenger aircraft. This model contains 500 Tris with a 512x512 texture and has a 100 Tri LOD with a 64x64 texture....

Airport Baggage Cart Full

Created by vasimr22

A baggage cart for an airport. This variant has an open side with luggage inside, as well as the towbar in the towing position. This model contains 150 Tris with a 128x128 texture and has an LOD with 45 Tris and a 32x32 Texture....

Airport Baggage Cart Empty

Created by vasimr22

A baggage cart for an airport. This variant has an open side with an empty interior, as well as the towbar in the towing position. This model contains 150 Tris with a 128x128 texture and has an LOD with 45 Tris and a 32x32 Texture....

Airport Baggage Cart Closed Storage

Created by vasimr22

A baggage cart for an airport. This variant has its side closed, as well as the towbar in stored position. This model contains 150 Tris with a 128x128 texture and has an LOD with 45 Tris and a 32x32 Texture....

Airport Baggage Cart Closed

Created by vasimr22

A baggage cart for an airport. This variant has a closed side, as well as the towbar in the towing position. This model contains 150 Tris with a 128x128 texture and has an LOD with 45 Tris and a 32x32 Texture....

Helicopter Square Marking

Created by vasimr22

Square helicopter landing marking prop. The pad corresponds to a 58ft square pad....

Airport Tow Tractor

Created by vasimr22

A tow tractor for an airport. These are typically used for towing baggage carts, but can be used to tow / pushback small aircraft. This model contains 200 Tris with a 128x128 texture and has an LOD with 75 Tris and a 32x32 texture....

Airport Airplane Towbar

Created by vasimr22

A towbar for an aircraft, usually connected to either a tractor (for towing) or a pushback for backing out of a plane stand. This towbar is the correct size for the 737 / A320 family. This model is in the horizontal position to be attached to a plane prop'...

Airport Airplane Towbar Resting

Created by vasimr22

A towbar for an aircraft, usually connected to either a tractor (for towing) or a pushback for backing out of a plane stand. This towbar is the correct size for the 737 / A320 family. This model is in the resting / unused position to be placed by itself. T...

Airport Cargo Pallet Loader Pack

Created by vasimr22

A collection of airport cargo pallet loader props. These are used to load ULD containders, as well as general cargo pallets onto aircraft. These are used by both cargo airlines (FedEx, UPS, DHL, etc.), as well as wide-body airliners for more efficient bagg...

Airport GSE Pack

Created by vasimr22

Basic Info This is a pack of Airport Ground Support Equipment (GSE) props. These are various pieces of mobile equipment for supporting aircraft when parked at a plane stand. I have also uploaded a pack of hoses / wires to be used with these props: http://s...

Airport Service Vehicle Pack "Functional Hack"

Created by vasimr22

Basic Info This is a pack of airport service vehicles which derive from busses. This idea came to me after seeing a youtube video of someone's airport in the game. The idea is that you place actual roads (mostly concrete roads from the network extensions m...

Airport GSE Wire Pack

Created by vasimr22

Basic Info This is a pack of wires and hoses for my ground support equipment pack here: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1089222595 Performance These use the same textures as the ground support equipment pack, and all have fewer than 7...

Airplane stairs pack

Created by vasimr22

Airplane stairs prop pack. These are models of rolling stairs (not motorized) which sit on 4 wheels. They are usually pushed into place by ground personel. There were two models here: CrewStairs737 (white / yellow) CrewStairsERJ (white / yellow) - the corr...

Airport Belt Loader Extended

Created by vasimr22

A belt loader for an airport. These are used to load baggage into the cargo hold of passenger aircraft. This model is in the extended position and is the correct height for the 737 and A320 airplane assets. This model contains 750 Tris with a 512x512 textu...

King Air 350 Plane

Created by MobiusOne

King Air 350 Plane Tris: 1570 Text: 512 LOD: 152 Text: 128...

Piper PA-31 Plane

Created by MobiusOne

Piper PA-31 Plane Uses 4 color variations on the accents (black, blue, red, green) Tris: 1487 Text: 512 LOD: 148 Text: 128...

Runway Skid-marks (Big Decal)

Created by Distanced

For use on runways. Generally, the majority of skid marks are near the touchdown zone (two thick white bars) and spread out from there. You can also fade these out by a tiny bit (the decal is really big so the hitbox has to stay fairly close to the ground,...

Airbus A300-600 - DHL Prop

Created by Konkku

DHL Airbus A300-600 Prop by Konkku THIS IS A PROP NOT A WORKING VEHICLE! For the vehicle version, click here DHL Aviation is a division of DHL Express responsible for providing air transport capacity. It is not a single airline but refers to several airlin...

Airbus A300-600 - UPS-United Parcel Service Prop

Created by Konkku

UPS-United Parcel Service Airbus A300-600 Prop by Konkku UPS Airlines is an American cargo airline owned by United Parcel Service. UPS has a fleet of over 230 aircraft, of which 52 are A300s. THIS IS A PROP NOT A WORKING VEHICLE! For the vehicle version, c...

Airbus A300-600 - FedEx Express Prop

Created by Konkku

FedEx Express Airbus A300-600 Prop by Konkku THIS IS A PROP NOT A WORKING VEHICLE! For the vehicle version, click here FedEx Express is a cargo airline based in Memphis, Tennessee. It is the world's largest airline in terms of freight tons flown. The airli...

Small Airport Fuel Truck

Created by Konkku

A very small fuel truck for refueling smaller aircraft at small airports. This asset is a combination of two models with some additional details by me. The cab and chassis are from jaijai's Hino Ranger. The fuel tank and fuelpump are from vasmir22's Small ...

Boeing 777F - Lufthansa Cargo (New Livery) Prop

Created by Konkku

Lufthansa Cargo Boeing 777 Freighter Prop by Konkku THIS IS A PROP NOT A WORKING VEHICLE! Vehicle version coming when Industries DLC comes out! Lufthansa Cargo is a German cargo airline and a wholly owned subsidiary of Lufthansa. The airline operates world...

Airport Catering Truck - Gate Gourmet "Bus Pack" 2

Created by Konkku

Volvo FE Airport Catering Truck - Gate Gourmet "Bus Pack" 2 These are driving bus versions of the trucks found in Airport Catering Truck - Gate Gourmet Prop Pack 2. HOW TO USE 1) Make sure you have the Improved Public Transport 2 mod. 2) Layout service roa...

Airport Catering Truck - Gate Gourmet Prop Pack 2

Created by Konkku

Volvo FE Airport Catering Truck - Gate Gourmet Prop Pack 2 Package Info This package contains nine different models which all share the same textures. Two stored trucks and six trucks with the body lifted to various heights. Here's a list of aircraft types...

UPS Air Cargo Container

Created by vasimr22

A UPS air cargo container. 30 Tris with 10 Tri LOD. Uses a 512x512 Diffuse, Specular, Normal texture....

FedEx Air Cargo Container

Created by vasimr22

FedEx air cargo containers. Upper deck container with, 30 Tris with 10 Tri LOD. Lower Deck container with 14 Tris. Both use a 512x512 Diffuse, Specular, Normal texture....

DHL Air Cargo Container

Created by vasimr22

DHL air cargo containers. Upper deck container with, 30 Tris with 10 Tri LOD. Lower Deck container with 14 Tris. Both use a 512x512 Diffuse, Specular, Normal texture....

Cessna 172 Skyhawk by Tomcat

Created by Tomcat

There are few alternatives in workshop for Cessna 172 Skyhawk but I thought this iconic aircraft needed better quality. So here is my prop version of this most produced aircraft ever. This is not 'vehicle', it is prop to be used in airport scenes. Vehicle ...

Rosenbauer Panther ARFF Props

Created by ninjanoobslayer

Rosenbauer Panther Airport Rescue and Firefighting Truck Props are here http://i.imgur.com/ceq3nUb.jpg Information This is the props for Herman the German and I's Rosenbauer Panther ARFF. Props are located in the COMMON Category. Use the Prop And Tree Anar...

Airport Pallet Dolly [Prop]

Created by vasimr22

A pallet dolly for airport ULD containers. These are used in place of baggage carts to transport ULD containers to aircraft, either for cargo or for passenger bags. This model contains 711 Tris with a 139 Tri LOD, and uses a 256x256 diffuse+specular textur...

Jet Bridge PreFab A32XLong [Glass]

Created by vasimr22

Basic Info This building is not functional, and is for visual purposes only. This version is fully extended, and was inspired by an actual one that extends infront of another planestand (at an angle) - hence the length. A prefabricated Jet Bridge as a buil...

Jet Bridge PreFab A32XShort [Glass]

Created by vasimr22

Basic Info This building is not functional, and is for visual purposes only. A prefabricated Jet Bridge as a building. This model is the correct height for the A320 Family (A320, A321, etc.) And possibly the B757. Most of the jetbridge is included in the b...

Jet Bridge PreFab 737Short [Glass]

Created by vasimr22

Basic Info This building is not functional, and is for visual purposes only. A prefabricated Jet Bridge as a building. This model is the correct height for the 737, as well as ERJ-175 / ERJ-195. Most of the jetbridge is included in the building, however, i...

Jet Bridge PreFab 767 [Glass]

Created by vasimr22

Basic Info This building is not functional, and is for visual purposes only. A prefabricated Jet Bridge as a building. This model is the correct height for the 767, and most likely for the 777, 787, 747, and A380 - at least visually close. Most of the jetb...

Jet Bridge PreFab B777 short [Glass] (4m)

Created by vasimr22

Basic Info This building is not functional, and is for visual purposes only. A prefabricated Jet Bridge as a building. This model is the correct height for the 777, and most likely the correct height for the 747 (lower deck), 767, 787, A330, A350. This jet...

Jet Bridge PreFab B777 long [Glass] (4m)

Created by vasimr22

Basic Info This building is not functional, and is for visual purposes only. A prefabricated Jet Bridge as a building. This model is the correct height for the 777, and most likely the correct height for the 747 (lower deck), 767, 787, A330, A350. This jet...

Jet Bridge PreFab B737 [Glass] (4m)

Created by vasimr22

Basic Info This building is not functional, and is for visual purposes only. A prefabricated Jet Bridge as a building. This model is the correct height for the 737. This jetbridge is based on a 4m high rotunda as opposed to the 3m high ones previously uplo...

Airport Tow Tractor Prop

Created by Konkku

A small tow tractor prop for airports. I made this to bring a bit more variation to your airports. Heavily based on Airport Tow Tractor by vasimr22. I also used some of jaijai's textures from his Hino Ranger template. Credits to them. Model: 245 Tris LOD: ...

Airport Marking Jetway Large

Created by Zoki

Airport Marking Jetway Large...

Airport Marking Jetway Small

Created by Zoki

Airport Marking Jetway Small...

Jet Bridge PreFab B757 [Glass] (4m)

Created by vasimr22

Basic Info This building is not functional, and is for visual purposes only. A prefabricated Jet Bridge as a building. This model is the correct height for the 757, as well as A32X family. This jetbridge is based on a 4m high rotunda as opposed to the 3m h...

PAPI Props

Created by AmiPolizeiFunk

Here are two new lightweight PAPI (precision approach path indicator) props for your airports: 1. PAPI-L-white 2. PAPI-L-red They are based on the PAPI 401CU-2 lights by OCEM. Each has two light effects pointed ~3° skywards, to help your approaching aircra...

Runway threshold green and red lights

Created by AmiPolizeiFunk

Cims from all around the internet are flying in to Berlin to geek out together at #PDXCON2019 Berlin next weekend. Many may arrive at Tegel Airport (TXL) in the north-west, while others will arrive at Schönefeld Airport (SXF) in the south-east. There's a g...

UPS Boeing 767

Created by SvenBerlin

UPS Boeing 767 by Svenpotsdam If you like that airplane, feel free to make a donation for the time I invested to make the skin for that aircraft. Thanks a lot. https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=Y76QCAPC5X7PY...

Boeing 777F - FedEx Express Prop

Created by Konkku

FedEx Express Boeing 777 Freighter Prop by Konkku THIS IS A PROP NOT A WORKING VEHICLE! FedEx Express is a cargo airline based in Memphis, Tennessee. It is the world's largest airline in terms of freight tons flown. The airline operates a fleet of over 650...

Cities: Skylines