Subscribe to download
Limited Fuel Car V3

The circuitry for a vehicle that has a limited amount of fuel and a example car.

How to set it up: to set it up place platform in world and either disconect the vehicle, or make your own using the car as a guide (look below for colour codes) if you are making your own vehicle make sure that each wheel has two bearings look at example vehicle for reference.

Config: The first section is called the fuel tank this is how many seconds of fuel there are in the tank the button labled plus will add one second to the time, the minus will take one away and the R will reset it back to 0 (do not use negative numbers). The second is the config the switch labled S is the saftey this one needs to be on for the vehicle to move and use fuel, the button labled R will "refill the tank". The last one will be for fuel stations that will refill the car, this part is non functional at the moment.

Colour codes: All the colours for the signal recepters are using the second row of colours going right to left. Orange is a upload and should be sending the seat information. Red is an output for the amount of fuel left, conect it two three number blocks (like on the test car) have the 1's as orange, 10's as red and the 100's as pink. Pink should be connected to the engine that propells you foward and purple for reverse. Blue will be for the Fuel stations.