Subscribe to download
BigAnt-ESH01-ProjectorReady

1. Build a suitable projector setup and load the Projector Ready version as blueprint.
   
2. Adjust the postion in such a way that the projector touches the red small block next to the green block. Set the projector to show only buildable blocks.
   
3. Construct the ship. As this build is quit complex i suggest using a buildership for the construction.
   
4. Once you have done the construction check the build for incomplete blocks all around. Also check internaly by going into the pilot seat while checking the parts of incomplete blocks. Some blocks are hidden by default hence make those visible through the eye icon.
   
5. Once you have done the check, feet the big reactor with uranium. To do this you have first to either feed the small reactor with a bit uranium too, or you replace the small reactor with a small battery. Check that the engines are online.
   
6. Now, remove the rotorheads that have been build with the rotors. You dont need those because the drill head already has a pair.
   
7. Remove the green blocks.
   
8. Go into the pilot seat and move the ship upwards until the rotorheads are in line with the rotor.
   
9. Go into the settings of your ship and look for the group "Rotor" and connect the roto with the rotor heads.
   
10. Remove the red blocks and you are ready.