Subscribe to download
DAN MFC

多功能飞行器，可携带2吨的卫星或者挖矿设备进入近地轨道。
入轨步骤:
1，按1启动交替式引擎，默认吸气。平飞直至超音速。
2，速度在700米每秒以上之后，调整仰角至25度左右，交替式引擎会将飞行器推至1100米每秒以上，再按3启动原子发动机直至入轨。此时可以按2切换交替式引擎至闭循环，留一点氧化剂够RCS对接用就可以。


备注：自己往下加火箭就可以进行星际旅行或者往返月球。默认配置携带了全套挖矿设备，可以丢弃或者更换载荷。

SSTO aircraft can carry 2 tons of satellites or mining equipment into low-ker orbit.
Tracking and reentry steps:
1. Press 1 to start the R.A.P.I.E.R engine and air cycle by default. Fly horizontally until supersonic..
3, After the speed is above 700 meters per second, adjust the elevation angle to about 25 degrees.Then he R.A.P.I.E.R engine will push the aircraft to more than 1100 meters per second, then press 3 to start the nuclear rocket engine to orbit. At this point, you can press 2 to switch the alternate engine to the closed loop, leaving a little oxidant enough for the RCS to dock.

Remarks: You can go for a Star Trek or mining on the moon by adding rockets. The default configuration carries a full range of mining equipment that can be discarded or replaced.