Subscribe to download
Bearstool Be6 'Buzzard'

Developed from lessons learned with the Be4, the Be6 featured an all new turbine engine, giving it greater speeds, lifting capacity and endurance and making it the perfect choice for coast guard missions.

Features
63 knot cruising speed
GPS Autopilot - https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1622757896
Altitude hold - https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1622747676
GPS Map - https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1863166097
Range: around 210km
6 passengers and 2 crew
Retractable rescue winch
Heater for arctic missions
Cargo lift capacity of over 2000 blocks
Retractable searchlight/camera
Engine service hatch with detailed turbine engine

To start
Enter the cockpit by either opening the cockpit door and clicking on the seat or enter the cabin and climb through the rear of the cockpit
Simply turn the key switch above your head and turn on the ignition
Remember to turn off parking brake before taxiing out

Using the harness
The blue control harness is used to remotely control both the harness and cargo winch.
To safely re-enter the cabin, press 3 in the harness and wait for the winch to be retracted and the door to cover the exit

Note
To taxi safely, keep throttle at 0.4, only increase throttle to 0.6 when clear of buildings.
Only use higher throttle setting with heavy cargo lifts, she gets a tad unstable at higher throttle settings
Be careful using the cockpit doors with the rotor still spinning, you'll have to crouch to avoid having a shave or just hop into the cabin and use those doors

Water landing
In the event that you need to ditch in the ocean, make sure you drain the fuel tanks. To do this, turn the key underneath the emergency battery breaker in the cockpit to dump any fuel. If you don't, she'll sink like a brick

Based loosely on H34 / Westland Wessex

Have fun :)