Subscribe to download
PYRO 01 (FIRE BEE) Control Station

This is the control station for the fire bee.


INSTRUCTIONS:

1) Drag FIRE BEE(w/ handle) or push the fire bee outside of the workbench and far enough away so it does not get despawned when the workbench is opened again. (NOTE: THIS STEP IS NOT REQUIRED IF YOU USE THE MISSION.)

2) Set the frequency that you wish to control the FIRE BEE on on the FIRE BEE. (NOTE: THE FIRE BEE IS CAPABLE OF HAVING MULTIPLE BEES SPAWNED IN AT A TIME. TO DO THIS, SET FREQUENCIES THAT ARE 3 APART. Example: BEE1=1, BEE2=4, BEE3=7, etc)

3) Flip the breaker on the FIRE BEE and press the brake.

4) In the control station, enter the frequency of the drone on the small keypad.

5) Get in the "Smart Guy" seat and then disengage the brake by pressing '2' twice.

6) Use W/S to go forward/backwards, and use A/D to steer. (Screen static represents how much time to set fires you have left.)

6) To start a fire, drive to the location that you wish to ignite, then hold the Start Fire button for 2 seconds. (NOTE: IT TAKES UP TO 10 SECONDS TO FULLY IGNITE, AND YOU NEED TO WAIT FOR ABOUT 15 TO 20 SECONDS FOR IT TO SET A TREE ON FIRE, YOU CAN USE THE CAMERAS TO CHECK TO SEE IF IT IGNITED.)


IMPORTANT: PLEASE DO NOT USE THE FIRE BEE OR THIS STATION IN YOUR CREATION WITHOUT CONTACTING ME. I WILL MOST LIKELY LET YOU USE IT IF:

I AM SET AS A CONTRIBUTOR.

IT USES A COLOR SCHEME I SPECIFY.

IT USES A NUMBER I SPECIFY.

IT USES A NICKNAME I SPECIFY. EX: FIRE BEE


ALSO!!!: IF YOU MAKE A VIDEO ON THIS PLEASE GIVE ME A SHOUTOUT.