Subscribe to download
Joystick Mod

You can control some special block through the joystick, if you install the mod.
你安装了这个模组，你就可以通过摇杆控制一些特殊零件。

Press Ctrl+F10 to open joystick manager window;
按Ctrl+F10打开摇杆管理界面

Originally posted by Note:

If you can't use this mod in the level editing scene, you can first enter the sandbox scene, and then back to the level editing scene, Finally ,the mod can work normally.
如果你在关卡编辑场景按了没用,那么你可以先进入沙盒场景,然后再重新进入关卡编辑场景,能正常使用了

The Console window joystick list shows your joystick device and its axis.
Press your joystick device button and move your joystick's axis,You can see the value change in axes list.
摇杆输出窗口主要是查看你的摇杆设备和设备上的所有轴，方便用户确定摇杆轴的序号，在摇杆列表里面点击你的摇杆设备按钮，然后移动你摇杆设备上的轴，这时候轴列表里面应该就能看到有数值变化了

The Axis mapper window mainly to edit your axis.
Change joystick menu and axis menu to the joystick and axis number you want to edit.
Move your joystick's axis ，now you should be able to see some changes in the window.
You should click the Save button to save your settings when you are finished editing.
The joystick manager window will display the axis button you just saved.
轴编辑窗口主要是编辑轴参数，点击摇杆和轴的箭头切换到你想要编辑的摇杆设备和轴序号，这时移动摇杆设备的轴你应该就可以看到变化了，当你编辑完轴参数后你需要点击保存按钮来保存你的编辑,点击保存按钮后摇杆管理窗口将添加一个按钮，就是你刚刚编辑的那个轴的按钮。

Through key mapper state click steering,wheel,piston or water cannon block you can see the axis block window and add a "+" button on your just moment saved axis.Press the axis's "+" button to add it to your selected block.
In Axis block window you can set whether your block accepts your joystick control and whether it is opposite to your axis output value, or you can set the maximum and minimum value of the control curve (usually used when your square has multiple axes).Press "X" button to delete axis from your selected block.
当你用小扳手点击铰链，轮子，活塞或水炮时方块的轴编辑器将显示，此时轴管理窗口里面的轴按钮后面将显示“+”按钮，你点击“+”按钮此时这个轴就添加到你选择得方块里面了，你可以通过设置轴开关来控制你选择的零件是否受摇杆控制，你也可以通过设置反向来让零件的输出与你的摇杆输出相反，你可以设置曲线的最大最小值来让零件表现出不同的控制效果（通常是在一个零件有多个轴控制时才设置这个值）

Finally, when your machine has set the axis parameters, you need to save your machine to be able to use the joystick to control the next load, otherwise you need to reset the axis parameters
最后，当你的机械设置好轴参数后需要保存你的机械才能在下次加载时也能用摇杆进行控制否则你需要重新设置轴参数

Note : Block need toggle on AUTOMATIC
注意 : 有的模块需要开启自动运行模式

• Wheel block-轮子零件
  
• Large wheel block-大轮子零件
  
• CogMediumPowered block-动力齿轮零件

Advanced Controls Mod [Besiege v0.45] is technical reference