Subscribe to download
RUNCITER loco. (with transmit control)

It is a locomotive with the ability to couple several locomotives and work together. You don’t even have to connect them because the communication goes through the antenna. You can put a second locomotive at the end of the train or put it on a parallel path it will still work.
I v used GE Dash 9-44CW to lot of detals, but it still not a copy. It have same easy control with my previous train, also here is auto-stop feature. It's a diesel-electric transmission powered by one large engine. There is 3 doors you can go through the locomotive from front to back, also here open engine room. It was ready more than week ago, I planned to make some cars but not finish any of it, sorry about that//

• W/S throttle control, at null brake will be On
  
• 1 change moving direction
  
• 2 push to brake
  
• 3 change track
  
• 4 spotlights

• Diesel-electric transmission powered by one large engine
  
• Max speed 250 kph
  
• 10000 L of diesel
  
• Monitor with stats, graph, front and rear camera, map
  
• Autostop by waypoint mark feature
  
• Bed

• To use transmit mode spawn 2 (or more, but it not tested) locomotives and turn on transmit mode only on main locomotive and other will be copy your actions.
  
• Disable brakes on other loco to tow it (button on panel close to bed)
  
• Press on graph monitor to check cameras, in transmit mode you can also use camera from other train.
  
• To use autostop set waypoint on map (should be on train way), set coordinates by keyboard and turn on Auto-stop button