Kerbal Space Program

Kerbal Space Program

Not enough ratings
Neo Eve lander/新型Eve登陆舱
   
Award
Favorite
Favorited
Unfavorite
Craft
Craft Type: Lander
File Size
Posted
599.553 KB
22 Apr, 2020 @ 8:11pm
1 Change Note ( view )

Subscribe to download
Neo Eve lander/新型Eve登陆舱

Description
This ship can land 3 kerbals on Eve surface and return from near its sea level.

本登陆舱可携带三名坎巴拉人从Eve表面近海平面高度处返回。
气动性能稳定,支持MJ自动发射,发射程序如下:

Launching procedure with MJ:
Set target orbit height at 120 km, set to current inclination;
Limit Q to 200000 Pa, AOA to 5 degrees;
Turn off corrective steering at the beginning, and turn it on after the third stage ignition;
Turn on auto-stage;
Turning curve:
Start turn: 10 km, v=500 m/s
End turn: 100 km,
Final heading: 10 degrees
Turning shape: 90%

设置目标轨道高度为120 km,倾角为“当前纬度倾角”;
限制动压200000 Pa, 攻角 5度;
起飞时关闭驾驶修正,在第三级分离后再打开;
打开自动分级;
重力转向设置:
开始转向: 10 km,速度:500 m/s,
结束转向:100 km,
结束转向时倾角:10度,
转向度:90%

Action Groups:
Num 1: Deploy heat shields
Num 2: Retract/Extend ladders
Num 3: Turn on/off first stage engines (used to decelerate before ground impact)

动作组:
数字键1:打开防热盾
数字键2:收放梯子
数字键3:开关一级发动机(软着陆减速用)

Warning: Make sure to descend from an circular orbit lower than 120km above Eve surface. The DV amount used to de-orbit should not be larger than 130m/s, and the reentry angle when entering Eve atomosphere should be no higher than 5 degrees relative to the ground, otherwise the heat shields will always explode due to overheat.

警告:请确保着陆起始高度低于120km,登陆前降轨所用DV 不得超过130m/s,进入eve大气时再入角不得高于5°,否则热盾必烧坏!