Space Engineers

Space Engineers

Not enough ratings
ISL - Skink RV-70 LAV (No DLC) DECOMMISSIONED
   
Award
Favorite
Favorited
Unfavorite
Type: Blueprint
File Size
Posted
1.865 MB
28 Nov, 2020 @ 6:05am
1 Change Note ( view )

Subscribe to download
ISL - Skink RV-70 LAV (No DLC) DECOMMISSIONED

In 1 collection by Spite
ISL Graveyard
37 items
Description
Purpose
A medium vehicle with limited cargo space, but plenty of battery and hydrogen power, the Skink has a longer range than the Gekko.

It is equipped with rear mounted, (projector ready) detachable decoys and two atmospheric thrusters, as well as two forward facing gatling guns mounted on hinges, allowing it to either chase or escape.

This vehicle will still be considered "printable," as there are only two sub-grids, each consisting of one gatling gun each. After printing, using a set up such as this one, simply place and weld up both gatling guns as seen in the screenshots, and add them to the "Ski-R MART Gatlings " group.

Find the DLC version here.

Features
Tools, Scripts & Weapons:
2 hinge mounted gatling guns
MART script - for controlling gatling gun elevation

Power:
2 Large Batteries
2 Small Batteries
4 Small Hydrogen Tanks
1 Hydrogen Generator
1 Hydrogen Engine

Movement & Control:
1 Control seat
1 Remote Control
2 Gyroscopes
4 wheels - 5x5

Cargo Space
2 Small Cargo Containers
2 Connectors - Top and Underside

Miscellaneous:
Ore Detector
Spotlights
Repair Projector
Decoy Projector

There are two white buttons just above the cargo access on the left and right sides, both perform the same function; lowering the suspension strength of all wheels. This is to allow the driver to lower the vehicle enough to enter the control seat without having to use a jetpack.

This vehicle has two gyroscopes, one of which is set up with a maximum roll override and is turned off, for use as an anti-flip system (tooblar 3, button 1). The other is used to help steer, and its strength can be adjusted using the controls on toolbar 5.

This vehicle has an empty mass of 19673 kgs.

All toolbars are the same from the cockpit and remote control.

All ships in this set have a rear mounted Merge block and can be printed using a welder wall with one (large grid) piston. The merge block on this vehicle also serves as a mount to place detachable decoys.

Toolbars
Toolbar 1
1. Wheel Power Down
2. Wheel Power Up
3. Wheel Friction Down
4. Wheel Friction Up
5. Thrusters On/Off
6. Connectors Switch Lock
7. Wheel Strength Down
8. Wheel Strength Up
9. Handbrake On/Off

Toolbar 2
1. Batteries Discharge
2. Batteries Recharge
3. Camera Front
4. Camera Underside
5. Lights On/Off
6. Gatling Gun Control OR
7.
8. Ore Detector On/Off
9. Antenna Broadcast On/off

Toolbar 3
1. Anti-Flip Gyro On/Off
2.
3.
4.
5.
6.
7. Hydrogen Engines On/Off
8. Hydrogen Tanks Stockpile On/Off
9. H2 Generators On/Off

Toolbar 5
3. Decrease Gyro Strength
4. Increase Gyro Strength

Toolbar 6
1.
2.
3.
4. Parachute Hatches Open/Close
5. Repair Projector On/Off
6. Decoy Projector On/Off
7. Merge Block On/Off (Drop Decoy)