Subscribe to download
Clotilda IIA (AHTS)

First of this is a work in progress and is not finished by a country mile. I spend a lot of time on it but i "burned out" with Stormworks for lack of a better term. If you want to use it (for missions and the like), be my guest. Just know that it is not finished and very likely not ready for career mode.

Summary
-Fits in the large workbench. (like the one at creative island so NO modded workbench needed.)
-Holds just over 100.000 Jet fuel and 500.000 Normal fuel.
-Huge Helipad of just over 13x13 meters, which can support everything up to the Chinooks.
-Length=64,25M, Width=14,25M (at the waterline), Height=31,75M.
-Hangar for small submarine or helicopter storage.
-Elevator goes to all decks.
-Two of NJersey's Starter RHIBs in the hangar.

PLEASE NOTE
-It's big but it's not that big and all the lag disappears when you're 50 meters out the dock.
-It is a little bow heavy at the moment but i am working on a fix until then the ballast system will have to handle it.
-The helipad has a fuel pump with 100.000 jet fuel however due to how the helipad is set up you need to connect a fuel line from the top the ship, above the bridge to the underside of the helipad. Everything explains itself once you see it. Follow the orange pipes if you can't find it.
-It is a ship and I primarily use it as a staging ground of sorts for my helicopter. If you plan on using helicopters as much as I do, I'd recommend getting a helicopter with fixed gear and no wheels. Otherwise you have to tie the helicopter with rope every single time you want to take off and land, which is no fun, you can but again it becomes a real chore after the 2nd time.
-The deck lights switch automatically from white to blue from 8PM to 8AM, you can turn this off if you don't like it.
-I choose the NJersey start boat for it's modest size and cost. However you can change it with anything you want. I found helicopters in the hangar to be a bit impractical but far from impossible. All you have to do is add connectors on the underbelly of the boat etc. no logic or electricity required far that.


Controls
3x4 autogenerators power 4 electric motors. Once you have flipped every switch and key in the bridge it should run itself.
There is a cubic f*ckton of things still to add but if you have an idea or suggestion please leave a comment, I've noticed that since I uploaded this ship I've regained interest in finishing it. As of now I am thinking of updating this weekly with changes I've made.