Subscribe to download
Large Drone Crash

The original blueprint for a large crashed drone from the Frostbite mission.
First of all, all the parts that were in stock were restored. Then the missing details were added symmetrically. After that, modifications were added from the image of the Heavy Drone from the final battle of the mission (they are different).
The fuselage of the original construction consisted of heavy armor blocks at the bottom, and light armor on the sides and top. The landing gears was missing. It contained the following functional blocks:

- Antenna
- Atmospheric engines
- Batteries (4 pieces)
- Warhead
- Remote control unit
- Containers (2 pieces)
- Gatling Turret
- Gyroscope

The following modifications have been made:

* Removed remote control unit and warhead.
* Gyroscope moved to the end of the fuselage.
* Added to the salon:
- Industrial cockpit (because it was impossible to install at least glass in front)
- Survival kit
- Container (the other two are covered by turrets)
- Lighting
* For access from the ground, a ladder was installed on the tail pylon;
* To exit the salon to the roof, a ladder was installed instead of one of the ceiling blocks.

I did not add the landing gears, although the design allows it. I wanted to keep the original construction as much as possible. In addition, blocks of heavy armor are located below, can be like landing gears. One drawback - when landing on an uneven surface, it can roll over.
The drawing is not complete in terms of design.