Subscribe to download
One Touch Beacon Coordinates Finder

This microcontroller allows you to find the coordinates of a beacon in the press of a button.

-Aim at the general direction of the beacon start moving toward the area and Start the system.

-After 5 seconds it will set it's first setpoint to start calculate the beacon coordinates.

-After 50 seconds it will set it's second setpoint and calculate the actual beacon coordinates.

-It will give you the two possible positions for the Beacon.

-The correct coordinates are the one in the general area of the beacon research zone.



For a vehicle moving around 100km/h timing the Second setpoint to 50 seconds give an accuracy of 300m.
For slower vehicle I recommend setting the Second setpoint to a longer timer.
Tweak the Second setpoint timer to get a better accuracy depending of your vehicle speed

To set it up you will need:

- a GPS
- a Beacon Finder
- 2 Instruments panels
- an electricity source

Check for working examples:
Portable version https://steamhost.cn/steamcommunity_com/workshop/filedetails/?id=2458684702
onboard version (WIP) https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=2458775282





Other Creations: https://steamhost.cn/steamcommunity_com/profiles/76561197981945398/myworkshopfiles/?appid=573090&p=1