Subscribe to download
Automatic Deep Core Mining Rig Zeta-11B (FIXED FOR SURVIVAL) DOES NOT WORK

good for you

Worked fine for me, though the drill head was a bit hard to weld even with subgrid projectors. I'm using it to reach the deep ore deposits from industrial overhaul, it went down 700m without issue.

Wish I could add pictures, and show you where I have issues.... There's missing something between the Pistons and the rotors on the upper and lower. Pistons are at max, and there's just empty space there. The projector on the Drilling rig shows as if there's suppose to be something there, but there's no projection being displayed.

thats why i hate projectors sometimes

they dont project the sub grids

yeah i noticed that just now

retract the pistons then add some rotor heads and make them connect to the rotors

I think I'm missing some blocks at some parts..., the projector has welded all necessary components, but as I've stated, once I start destroying the red blocks, the drilling rig falls off and goes poof! I must be missing something...

The pistons are set to 0.5 m.... they don't attach to the drilling rig at all,

so i just tested it and you have to :

1. remove all red blocks

2. set the pistons to max KN and wait 10 sec

3. press the 4th button and wait 5 sec

then you should be ready


-i will do more testing to see where something could be missing

I set both KN's to max, pressed the 4th button, then tried destroying the red blocks, and it falls apart. Am I missing something ?

As soon as I destroy the Red blocks, the rig falls apart...... Drills drop and the pistons don't work....