Subscribe to download
Koleop'Terre PR-4S 'Camargue'

Xbox: https://spaceengineers.mod.io/koleopterre-pr-4s-camargue-4x4

Mods/DLCs blocks: 0


The Camargue is a four seater 4x4 able to carry trailers. It is the first vehicle of Koleop to introduce a no-script multi-trailer manager, with several changes from previous models. The multi-trailer manager allows the tractor to use the wheels of every compatible linked trailers to provide more propulsion and also doing power management and maintenance operations.

Note: the multi-trailer manager will not work on not configured trailers, but allows this vehicle to tow at least one or two light trailers.

• Brakes: switch the handbrake from every linked trailers between on/off.
  Warning: before driving, check that every trailers have their handbrake on.
  
• Propulsion override: all slaved trailers move front, move back, or does not assist the master.
  
• Height offset: all grouped wheels switch from the lowest height offset to the highest height offset.

• Batteries: all batteries are in recharge mode or auto mode.
  
• Reactors/H2 engines: all of these power sources are on or off.
  
• H2 tanks: all hydrogen tanks are in stockpile mode or not.

• Pistons: all pistons are extended or retracted.
  
• Gyroscopes: used to roll all the train (master and slaves) in case of upside-down event. Every gyroscopes must roll on the same side.
  
• Connectors: all connectors are locked or unlocked.
  
• Projectors: all projectors are on or off.

- Switchable height offset
- Trailer manager
- 4x seats
- 1x projector to repair damaged areas.
- 1x empty programmable block
- 1x gyroscopes
- 2x parachutes
- v8 H² engine
- rear hook used to attach trailers and/or to refuel hydrogen tanks.

PCU: 2.8k
Blocks: 342

Speed: 240 km/h
Main power supply: 2x hydrogen engine + 5x hydrogen tanks
Rescue power supply: 5x small batteries
Recharge: 1x connector, 1x hinge, 2x small reactors

Note: I find more challenging to build a functional train system without scripts/mods, but in case you need to use some scripts there is always an empty programmable block in the rover. Keep in mind that scripts may conflict with the actual configuration if you use the no-script system, and I don't mind testing every scripts available in the workshop, even if there is one or huge amount of them, to find conflicts.