Kauppasivu
Stormworks: Build and Rescue
Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Stormworks: Build and Rescue

Kauppasivu
Stormworks: Build and Rescue >  Workshop > Käyttäjän Thales Workshop
31 arvostelua
Engine Thrust Test
Kuvaus Keskustelut0 Kommentit24 Muutokset
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Vehicles: Vehicle, Technical, Creative, Mechanical, Advanced
Tunnisteet: v1.13.4
Tiedostokoko
Julkaistu
Päivitetty
786.522 KB
26.1.2022 klo 16.15
21.1. klo 11.51
12 muutosilmoitusta ( näytä )
Tekijä
Thales
Kirjautunut ulos
Näytä kaikki 34 kokoelmaa
2,987 Uniikkeja kävijöitä
853 Nykyiset tilaajat
49 Nykyiset suosikit

Tilaa ladataksesi
Engine Thrust Test

Kuvaus
User Guide

You can measure thrust with this scale. Follow the steps shown on the control panel.

I already installed an engine and its control panel. But you can remove those and make your own.

Selecting engine mount slot: Smaller number for faster result, higher number for precise result.

If you mount your entire vehicle on the platform instead of just the engine, make sure all sub-bodies on your vehicle are removed or merged in to vehicle to avoid measurement errors. Also make sure thrust is not angled such as propeller pitch/roll.


Tags: Engine Thrust Mass Measure Balance Weight Scale
24 kommenttia
< >
Thales  [tekijä] 21.1. klo 4.16 
Updated: Fixed issues caused by gas update and simplified control panel.
Thales  [tekijä] 22.3.2023 klo 10.56 
you are welcome
Chris6ix 22.3.2023 klo 10.53 
Oh didn't even notice that...must have missclicked when i flew around to check everything out. Thanks man :)
Thales  [tekijä] 22.3.2023 klo 10.47 
There is a hole in the big left blue tank.
Chris6ix 22.3.2023 klo 10.33 
Hey, I'm not sure if I'm doing something wrong or if the creation is broken, but the "Total Fluid (Tare + Lifted)" just goes to 0 after waiting for quite a while without the "Balance Achieved" light going on...

I have uploaded my try to get it to work to the workshop: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=2950665986

Could you please try it yourself and tell me if i did something wrong?
Thales  [tekijä] 5.1.2023 klo 4.03 
@krail,
Thanks!
krail 30.12.2022 klo 1.12 
Nice system!
Thales  [tekijä] 14.12.2022 klo 13.44 
It does not matter much, other than precision and waiting time. Smaller slot numbers for bigger engines, bigger slot numbers for smaller engines. I use slot 1 most of the time. If your engine is medium or big you can use 0.3 or 0.5 slots to wait less. If you are not comfortable with precision (this is usually the case for very small engines) switch back to slot 1 or maybe 2 if your engine is really small.
ApocTheWanderer 14.12.2022 klo 13.22 
I get that but how do I determine what number I NEED to use
Thales  [tekijä] 14.12.2022 klo 0.02 
ApocTheWanderer,
See numbers on the beam