Subscribe to download
Spud P4 Dozer

• The Spud P4 is a highly versatile machine due to the Spud continuous revolving track design. Pull thousands of pounds up and down slopes.
  
  
• Outlast any other machine with over 1000L in the fender mounted fuel tank. You will virtually never need to refuel with the single cylinder 3x3 diesel engine coupled to a 4 speed forward and reverse transmission.
  
  
• Spud's innovation in the technological world has allowed for a new design of simple operation. Spud features an all new aesthetically pleasing display with your current grade in degrees, engine temp, fuel tank level, and battery charge. All of which are displayed on a convenient and easy to read panel.

1. Subscribe to the workshop item and navigate to it in the workshop tab when inside of the workbench. Click on the "Spud P4" icon and press spawn in the top left corner of your screen.
   
   
2. Make sure the front pistons have correctly attached to the connectors on the blade. (If they have not correctly attached, make sure to re-spawn it until it is fixed)
   
   
3. Press the red button next to the cab and jump up on the track and into the cab. Get in the operator seat and press the corresponding button on the floor that you came in with to close the door.
   
   
4. Once in the operator seat look to the back left and flick the circuit breaker named "Electric".
   
   
5. Then flick the lever named "Key" on the right side of the main console.
   
   
6. Above the "Key" switch, press and hold the button name "Starter" for 1-3 seconds.

• Up/Down arrow keys control throttle.
  
  
• W/S control forward and backward movements
  
  
• A/D control turning left and right movements.
  
  
• To increase speed look to the left of the main console and press the "Gear Up" button. Press the "Gear Down" button decrease speed.

Originally posted by Potato:

Don't repost or claim anything from this build