Subscribe to download
Series II-57 UA

---

Building elements widespread in Kharkov Series II-57 UA . Typical projects in this series were developed by the KHARKIVPROEKT institute in the mid-1970s. The houses were built at Kharkiv HBC-1 until the mid-1990s. Series II-57 UA is widely represented in Saltivka, Oleksiyivka, Obriy, Sonyachnyi, Rohansky residential neighborhoods in Kharkiv.

---

Unfortunately, many of these buildings were damaged or destroyed as a result of shelling of residential neighborhoods by rocket launchers of the Russian Federation. This mod was created in memory of these houses and their occupants who left them, hid in their basements or died from Russian cluster munitions, debris and fires.

---

The presented elements allow to make the following houses:

• Standard project II-57-03 / 09 UA - 3 sections of 9 floors,
  
• Standard project II-57-03 / 12 UA - 3 sections of 12 floors,
  
• Standard project II-57-04 / 09 UA - 4 sections of 9 floors,
  
• Standard project II-57-04 / 12 UA - 4 sections of 12 floors

---

List of items:

• 1 floor - 1st floor of the ordinary section, has a height of 3.6 m, includes 2 variations of window layouts for night illumination.
  
• 1 floor endplate - end plates of the first floor, lock 1 floor of the house on both the left and right side, rotate to change the end.
  
• 1 floor L90 - 1st floor of the left turning section 90°, has a height of 3.6 m.
  
• 2 floor L90 - 2nd floor of the left turning section 90°, has a height of 2.7 m.
  
• typical floor - typical floor of a ordinary section, has a height of 2.7 m, includes 4 variations of window layout for night illumination.
  
• typical floor endplate - end plates of a typical floor.
  
• typical floor L90 - typical floor of of the left turning section 90°, has a height of 2.7 m, includes 4 variations of window layout for night illumination.
  
• roof - coverage of the ordinary section.
  
• roof L90 - coverage of the left turning section 90°.
  
• roof endplate - end plates of the ordinary section.

It is also planned to create another turning elements.

---

To suppress the collision check in the assembled building, enter the following lines in building.ini:
$ HARBOR_OVER_WATER_FROM -9
$ HARBOR_OVER_TERRAIN_FROM 2.1
$ HARBOR_EXTEND_AREA_WHEN_BULDING -100