Subscribe to download
Dornier Do 24 [DISCONTINUED]

Weight: 6.1 ton
Cruise speed: 280 km/h
MAX speed: 350 km/h
Crew: 3
Passengers: 3
Weaponry: All decorative


Can be operated by 1 person

Pilot and co-pilot seats have different controls (w/s for throttle or w/s for pitch)

The engines will overheat at throttle above 0.85, it is intentional.

You can fly on 2 engines.

It has refueling ability, all working electrics.


1. In the engineer room (right behind pilot cabin) turn on main electrical (MES)
2. Turn both EN1 and EN3 on
3. Press and hold both EN1 and EN3 starters until engines reach 300 RPM
4. Enable generator auto sync (gen sync)
5. Start EN2 like as you did with EN1 and EN3

Ready for taxi / take off


To take off, set throttle to 1, you'll start to gain speed. At 75/80 km/h pull up. As soon as you break out of water, decrease throttle to 0.85. You're in cruise.

Hint: You can go full throttle, for example to gain altitude faster, however engines will overheat. If engines warmed up already (about 83-84 C*), you'll have about 1 and a half minutes before overheat (in hot region). So use it with care.

To land, simply drop throttle to 0.75 and trim elevator to 0.45. You'll have nice landing slope at 2 m/s

Also, roll is automatic in mouse control mode. You can switch it to A/D by toggling following option:



Type VIIc on picture in the description - SergeantTeaspoon
_______________________________________________________________


Fix - buoyancy simulation tweaks
Fix - corrected misplaced wing struts
_______________________________________________________________
Peace \/