Subscribe to download
S1850M Radar System

This is a recreation of the S1850M Radar Used By The Royal Navy.

This radar is mostly estatic but it is still functional, It can track a target while it is still in discovery mode.
It has 2 radars: 1 for tracking and 1 for discovering targets .

EDIT: *The Stand Is Not Included, Its Just For Decoration*

Features:

The Cool looking radar xd, 2 controll displays with instrument panels(Move them somewhere else),
The displays Show the target On the map witch a red marking if found/locked and the radar pos is a blue marking.
Also has Auto Zoom but can be increased or decresed by the buttons on the instrument panel.
Can Skip/'unllock, the target usefull when its doing the search and the locking with the second radar aswell.
Also Indicates if it has achived a Lock.

Outputs: The Microcontroller on the Left(from the back side) has a target info composite output: This is the discovery data sends the X,Y,Z, vX, vY, vZ[Velocity/tick] and a true on ch 1 if it sees a target, however the velocity data might not be accurate due to it not tracking the target.

the one on the right sends the tracking info same as before X,Y,Z... etc etc. but this time the velocity data is accurate(if out filter is off).

There are 2 composite switchboxes on the left these switch between outside data for the tracking system so you can tell the tracking when to use the discovery data and when to use outside data.


Microcontrollers:

These Microcontrollers are identical but i dont reccomend the switching modes only if you want to use it for something specific.
the MC has some key settings:
-Search Speed[Num] this is the rotation speed when the radar is searching for targets.

-Mode(Search only / Track Only / Search And Track) this sets how the system works.

-Filter output[yes/no] this applies a Neuman Filter to the output data this means not the most acurate data but there will be a smooth transition between the numbers.

-Minimum Distance(NUM) this is the minimum distance for tracking and search so if it finds a target and its smaller then said number it won't track or send out the tracking data.

-Target Info[Overides/Dosen't] this makes it if it dosent have a target and gets target info it will try to lock on it, but if it already has a target it won't try to lock on the target info unless its on [Override Current Target] in that case it will give up its current target.

-Zoom Divider[NUM] this number is used for auto zoom on the map, i only reccomend changing it if you use a diferent display and you should experiment on your own.

-Zoom when no target[NUM] the zoom of the map when it dosent have a target or in search mode.

-Auto Pitch And Its Value Slider: if its Enabled then the radar will rotate untill it reaches that number, this is just so you can set where it looks by default.

-Map Brightness[Num] sets the brightness of the map.

-Show Cords On Map[Y/N] if true it will show the target cords on the display but if it dosent have a target it will just display its current cords.

The Following Atributes Only Infuelce the tracking:

-Laser[On/Off] it turns the laser output on when it locks on a target.

-Rotation Multiplier On Lock Attempt[NUM] the rotation speed gets Multiplied by this number when its tying to achive a lock on the target so it makes the system capable of searching realy fast but if set right still manage to lock on anything.