Subscribe to download
C4V primary transmission V3

I know no one cares but anyways.

Nodes:

comp out + gears : basically, this tells you the gears along with some other stuff
comp for trans : this is what you input for it to all work
start : to start it all
clutch : this goes to your clutch
RPS : engine RPS
clutch : this the input for your clutch

Settings:

start button type: what type of button are you using to start it all
gear up channel : the channel for gear up
gear down channel : the channel to gear down
gear lock channel : the channel for the gear lock
gear number channel : the number for channel. i think you get the idea
gear amount : how many gears do you have (only goes up to 9)
reverse gear channel : channel for reverse if you have that set
reverse : either shift down all the way or have it on a switch
gear hold : ok, this is going to be a oversimplified way of explaining it. but basically, if its off and you are in first, only the first gear is active and if you shift in to second then only the second one is active. if its on then if your in first the first gear is active and if you shift into second, both first and second are active.

auto clutch settings, i wont go over them since you should understand them fairly well

note: this is how i steal your data. na. its just a note.

composite channels:

in:

gear up ( push ) : you set this from the settings, default is 1 | this is so you can shift up
gear down ( push ) : you set this from the settings, default is 2 | this is so you can shift down
gear lock ( indicator ) : you set this from the settings, default is 11 | this is just a indicator to tell if the transmission is active or not
gear number ( number ) : you set this from the settings, default is 1 | just a number to tell you what gear your in

gears :

gear 1 | ch 1
gear 2 | ch 2
gear 3 | ch 3
gear 4 | ch 4
ect ect to 30
reverse | ch 32

NOTE: this is a VERY basic transmission. there is no auto, there is no TCS. this is just to control the gears and clutch. you have to make your own micros if you want to use up/down for gears or to have it automatic. so this might not be for everyone.

other then that... i got nothing. Have fun and dont stall your engine.