Subscribe to download
RakJPz 2 HOT

Controls:

Driving: WASD / WASD + Alt

ATGM guidance: Mouse + Alt

Fire ATGM: Fire action 1

IMPORTANT!

!The missile uses mouse guidance instead of homing, so it might be a bit hard to aim!

Design:

The chassis which was destined to be produced by the thousands was also shared later in 1971 by the Marder IFV. The chassis comprised a six evenly-spaced roadwheels drivetrain suspended on torsion bars, with three return rollers, rear drive sprocket and front idler. The powerplant was a 29,4l MTU MB 837 Aa V8 water-cooled multi-fuel diesel which developed 500 hp (368 kW). The hull was a simple shape of rolled RHA, with sloped sides, half of the front being occupied by the driver and fighting compartment while the rear was occupied by the engine compartment, with a step downwards. Due to the nature of the type, the larger part of the fighting compartment was reserved for 12 missiles in all, with two launch rails that could be raised up for the missile to be loaded in, wings folded.

Two missiles were ready at all times, for a total of 14. The reloading process was automatic, and take only a few seconds while the missile was loaded vertically. The two launch rails could traverse up to 180° and were served by a single operator and loader. The driver was located to the left, the commander to the right, each with their own single-piece hatch folded to the side, and three vision blocks.

The central one could be swapped for a night vision device. The commander's hatch was given a front pintle mount for an aerial MG3, while another one was fixed, placed in ball mount inside the front glacis. Another pintle mount could be placed behind him, in front of the loader's hatch. Guidance was assured by the operator, sitting right between the driver and commander to the front, with a periscope, camera and stereoscopic range-finder.

Extra equipment included several fixations on the rear plate for extra fuel jerrycans, side fasteners for shovels, pickaxes and hammers, tooling boxes on the engine deck, and a V-shaped bank of height smoke dischargers.

(this is for the original Raketenjagdpanzer 2)

Tags: RakJPz RakJPz 2 Raketenjagdpanzer 2 ATGM missile anti tank anti-tank german germany war military tank cold war

This is a creation made by Rask the Viking, I wont allow any modifications to be uploaded to the workshop WITHOUT my consent, i also do not allow any reuploads as i do not take it lightly.

You have been warned.

Feel free to suggest stuff in the comment section below.

Thats all, have a wonderful day.