Subscribe to download
VCZ Cargo Elevator v2.0

Tested in single and multiplayer November 7, 2023: Works in single player.

If you can get it working? Great! Share how you did it or re-publish the fix and let us know in the comments. I'll appreciate the help keeping this mod alive / be glad to share a well emphasized link to a working MP version here in the description if you re-publish it.

"Use at your own risk" because if you build it in MP without reading this...you should have read this. I know it doesn't work in multiplayer.

---

Link to original mod: https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=1711861968

If the original author asks this will be taken down as soon as I receive their request.

---

THE EASIEST WAY:
1. Build a 7x7 square armor block platform with a 5x5 hole in the middle. (must be powered)
2. Build the VCZ Cargo Elevator Piston block in the 5x5 hole.
3. Build a VCZ Cargo Elevator Floor around the elevator's piston block.
4. Build Fillers and floors as you want, as you need. The door block is not necessary to use.
5. Built a Floor block for the top floor.

AS SHOWN IN THE SCRENSHOTS:
1. Build a 7x7 platform with a 5x5 hole in it. Place 1 block somewhere under it (I use a battery to insure it's powered) and build a 5x5 platform starting under that block (the battery) so the 5x5 platform is the 3rd layer of blocks down.
2. Build a VCZ Floor block on the 5x5 base platform.
3. Build a VCZ Piston block on top of the floor block on the base platform.
4. Place your first floor.
5. Access the control panel of the piston block and set the velocity negative to drop the car down.
6. Place your filters, doors if you want (doors aren't required) and additional floors.

Tip: Use the back corner posts on the right side to line the filters and additional floors up more easily. They can be challenging to place if they're not built using the back right corner as the reference point to build off of.

Take it for a ride!

---

https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=3033431821

TO USE THE PRE-BUILT PLATFORM BLUEPRINT:
- Dig down 3 blocks counting the block you're standing on you want the elevator level with.
- Build the base platform for the elevator 5x5. Make where you want the elevator level with 7x7 with a 5x5 hole.
- The base platform should be the 3rd block down from the floor you want the elevator level with. The base structure should be 3 blocks high, total, with the 5x5 platform at the bottom.

You have to dig a hole to use the pre-built platform blueprint.
The elevator won't work if there are voxels (ground textures) in its way.

---

Click the image or go to:
https://steamhost.cn/steamcommunity_com/sharedfiles/filedetails/?id=3030780799