Subscribe to download
JostVanArms Thunderstreak Mk 1

The Thunderstreak Mk 1 is an advanced loitering drone system designed and manufactured by JostVanArms. Despite being relatively small when compared to other drones, it manages to combine ease of use with various performance-enhancing features, allowing it to engage and destroy a wide variety of targets with unprecedented position. Combined with its lightweight, portable tripod launcher and command station, it can be deployed anywhere and used to great effect on the battlefield.

SPECIFICATIONS (THUNDERSTREAK MK 1)
Weight: 16.15kg
Dimensions: 1.05m x 0.57m x 0.57m
Speed: 75m/s
Range: >100km
Effective kill radius: 8m

SPECIFICATIONS (LAUNCHER, W/O DRONE)
Weight: 21.97kg
Dimensions: 2.38m x 1.16m x .0.95m

SPECIFICATIONS (BRIEFCASE)
Weight: 142kg
Dimensions: 1.92m x 1.34m x 1.24m

OPERATOR'S MANUAL
While I have a basic demonstration video , you may find a very simple manual of operations below.

Controls
Launch: Action 1
Missile controls: Alt + Mouse
Pitch hold: Disable Steering (X)
Orbiting mode: Invert Steering (Hold X)

How to use
1. Spawn the launcher in the direction you desire.
2. Move the launcher to the position you desire.
3. Get into the control seat and fire the drone.
4. Switch to the drone's camera and direct it towards your target.

IMPORTANT THINGS TO NOTE
• You will notice that the drone will roll a bit when turning, do not worry about this as it should not adversely affect its flight performance.
• In low-fps conditions, the drone becomes unstable. Unfortunately, I was unable to fix this problem and thus I would not recommend spawning it in when your FPS is below 30.
• When the orbiting mode is engaged, the drone will pitch down, then up again throughout the 360 degree turn. This is as a result of the slight issue noted with the roll system in the first point. Do not be too concerned about this; so long as the pitch hold system is activated it will remain at the same general altitude.

Laptop used in the command station

If you wish to use this in your creation, please include credits!