Obchod
Stormworks: Build and Rescue
Vše Diskuze Snímky obrazovky Obrázky Přenosy Videa Workshop Novinky Návody Recenze

Stormworks: Build and Rescue

Obchod
Stormworks: Build and Rescue >  Workshop > Workshop uživatele thechort
Nedostatek hodnocení
16KW Nuclear Steam Generator
Popis Diskuze0 Komentáře11 Poznámky ke změnám
   
Ocenit
Přidat do oblíbených
Oblíbeno
Odebrat z oblíbených
Vehicles: Vehicle, Wip, Stationary, Subassembly, Advanced
Značky: v1.9.4
Velikost souboru
Přidáno
Aktualizováno
741.552 KB
18. říj. 2023 v 14.48
18. říj. 2023 v 22.22
Poznámky ke změnám (4) – zobrazit
Vytvořil
thechort
Offline
Prohlédněte si všechny kolekce (6), z nichž některé mohou být skryté
273 unikátních návštěvníků
99 odběratelů
5 přidání do oblíbených

Klikněte na „Odebírat“ pro stažení položky
16KW Nuclear Steam Generator

Popis
Nuclear steam generator that uses one steam turbine to make 16000 watts.
There are 2 versions one in a red box and one in a yellow box.

Red box uses a blinking clutch to more quickly spool up the flywheel to 500 rps. The generator then continues to increase the flywheel rps until it stabilizes at 570 rps under it's own power.

Yellow box uses the function clamp(x/500,0.05,1) where x is the flywheel rps. This linearly increases the clutch pressure on the flywheel until it reaches 1 at 500 rps. It then continues beyond that on its own power.

I personally I would use the blinking version since it spools up way faster than the linear function.

Volume warning upon spawning in. It uses electric hatches that open to relieve the gas pressure in the reactor.
Počet komentářů: 11
< >
Adalenski 23. říj. 2023 v 20.21 
oh ok I tested it with a linear version which capped out at around 20k RPS in hours that I dont recall but the glitch blinking RPS reached 10k rps in a short period of time but I ran out of time to test further im running longer test tomorrow
thechort  [autor] 23. říj. 2023 v 20.03 
@j@ ahh yeah, the blinking is a glitch and allows you to go beyond what a generator can do on its own. I like using the blinking to spool up the flywheel quicker just to save time. The blinking will give you issues if you use the rps output for props, wheels or tracks.
Adalenski 23. říj. 2023 v 19.57 
Also your blinking RPS Reactor is what made mine possible thank you
Adalenski 23. říj. 2023 v 19.52 
@thechort I have made a 1000KW Nuclear Reactor and I just uploaded it to the workshop
thechort  [autor] 22. říj. 2023 v 16.07 
@J@ Good job! I'm glad you figured it out! I couldn't care less if you copied it and added it to something. The point of uploading to the workshop is to allow others to use the things you make.

Upload your generator, I'd love to check it out!
Adalenski 21. říj. 2023 v 19.20 
@thechort thank you for making this creation it has helped me duratically i copied non of your conent but only uour layout kinda and I made a reactor that generates 235KW
Adalenski 21. říj. 2023 v 19.19 
never mind i figured it out
thechort  [autor] 21. říj. 2023 v 16.50 
@J@ Reactor heats boiler.
Boiler on logic = (Boiler Temp<110)&(Boiler Pressure<8) activates boiler coolant pumps.
Boiler Pressure>0.05 activates turbine/condenser pumps/radiator.
The regular clutch connected to the generator is set to 0.45 to allow clutch slip.
The Flywheel front 5x5 Clutch blinks on and off until the flywheel reaches 545 rps or uses the logic of clamp(x/545,0.05,1), where x=Flywheel RPS, for the non-blinking version.

The key to getting a lot of power out of steam turbines is making sure the flow rate through the turbine is 3600L/s
Adalenski 21. říj. 2023 v 16.36 
care to explain on how it works? because I don't understand the logic side of it
Rufus Shinra 21. říj. 2023 v 14.31 
Tinkering the reactor right now to make a slightly more compact variant of the yellow version to fit in the boat. Some issues of power loss due to a much more complex pipe network, but it should work eventually.