商店頁面
Stormworks: Build and Rescue
全部 討論區 螢幕擷圖 藝術作品 實況直播 影片 工作坊 新聞 指南 評論

Stormworks: Build and Rescue

商店頁面
Stormworks: Build and Rescue >  工作坊 > thechort 的工作坊
評價次數不足
16KW Nuclear Steam Generator
介紹 討論區0 留言11 更新註記
   
獎勵
加入最愛
已加入最愛
移除最愛
Vehicles: Vehicle, Wip, Stationary, Subassembly, Advanced
標籤： v1.9.4
檔案大小
發佈於
更新時間
741.552 KB
2023 年 10 月 18 日 下午 2:48
2023 年 10 月 18 日 下午 10:22
4 項更新註記 （檢視）
建立者
thechort
離線
查看所有 6 個收藏（有些可能設為隱藏）
273 不重複訪客人數
99 目前訂閱人數
5 目前最愛人數

訂閱以下載
16KW Nuclear Steam Generator

描述
Nuclear steam generator that uses one steam turbine to make 16000 watts.
There are 2 versions one in a red box and one in a yellow box.

Red box uses a blinking clutch to more quickly spool up the flywheel to 500 rps. The generator then continues to increase the flywheel rps until it stabilizes at 570 rps under it's own power.

Yellow box uses the function clamp(x/500,0.05,1) where x is the flywheel rps. This linearly increases the clutch pressure on the flywheel until it reaches 1 at 500 rps. It then continues beyond that on its own power.

I personally I would use the blinking version since it spools up way faster than the linear function.

Volume warning upon spawning in. It uses electric hatches that open to relieve the gas pressure in the reactor.
11 則留言
< >
Adalenski 2023 年 10 月 23 日 下午 8:21 
oh ok I tested it with a linear version which capped out at around 20k RPS in hours that I dont recall but the glitch blinking RPS reached 10k rps in a short period of time but I ran out of time to test further im running longer test tomorrow
thechort  [作者] 2023 年 10 月 23 日 下午 8:03 
@j@ ahh yeah, the blinking is a glitch and allows you to go beyond what a generator can do on its own. I like using the blinking to spool up the flywheel quicker just to save time. The blinking will give you issues if you use the rps output for props, wheels or tracks.
Adalenski 2023 年 10 月 23 日 下午 7:57 
Also your blinking RPS Reactor is what made mine possible thank you
Adalenski 2023 年 10 月 23 日 下午 7:52 
@thechort I have made a 1000KW Nuclear Reactor and I just uploaded it to the workshop
thechort  [作者] 2023 年 10 月 22 日 下午 4:07 
@J@ Good job! I'm glad you figured it out! I couldn't care less if you copied it and added it to something. The point of uploading to the workshop is to allow others to use the things you make.

Upload your generator, I'd love to check it out!
Adalenski 2023 年 10 月 21 日 下午 7:20 
@thechort thank you for making this creation it has helped me duratically i copied non of your conent but only uour layout kinda and I made a reactor that generates 235KW
Adalenski 2023 年 10 月 21 日 下午 7:19 
never mind i figured it out
thechort  [作者] 2023 年 10 月 21 日 下午 4:50 
@J@ Reactor heats boiler.
Boiler on logic = (Boiler Temp<110)&(Boiler Pressure<8) activates boiler coolant pumps.
Boiler Pressure>0.05 activates turbine/condenser pumps/radiator.
The regular clutch connected to the generator is set to 0.45 to allow clutch slip.
The Flywheel front 5x5 Clutch blinks on and off until the flywheel reaches 545 rps or uses the logic of clamp(x/545,0.05,1), where x=Flywheel RPS, for the non-blinking version.

The key to getting a lot of power out of steam turbines is making sure the flow rate through the turbine is 3600L/s
Adalenski 2023 年 10 月 21 日 下午 4:36 
care to explain on how it works? because I don't understand the logic side of it
Rufus Shinra 2023 年 10 月 21 日 下午 2:31 
Tinkering the reactor right now to make a slightly more compact variant of the yellow version to fit in the boat. Some issues of power loss due to a much more complex pipe network, but it should work eventually.